Durkopp Adler 768 - 274
1-needle machine
Triple foot transport (stitch length up to 10mm)
Large hook
Initial and final locking
Needle positioning
Energy-saving EFKA 230V motor + EFKA Variocontrol 820 operator panel
The machine is in perfect technical condition
Durkopp Adler 550 - 12 - 24
Sewing machine for gathering furniture fabrics with the possibility of sewing in a reinforcing ribbon.
1-needle machine with a double-thread chain stitch, with differential bottom (tooth) feed, alternatively with differential upper presser foot. The machine has an electro-pneumatic foot lift, electronic programming of smooth seams or shirring.
Presser foot lift up to 7mm
Lifting the walking foot up to 15mm
Durkopp Adler 195 - 671110 - is an efficient and fast machine with elastic chain stitch
Arm sewing machine with binding function
Triple transportation
Manual reverse
380V motor
Efficient machine removed from production
Garudan GP 510 1 - 141
Post sewing machine
- triple transport
- safety clutch protecting the hook against damage
- stitch length up to 8mm
- lifting height of the rolfus up to 11mm
- 380V clutch motor
Efficient machine removed from production
Garudan GP 510 6 - 141
Post sewing machine
- triple transport
- safety clutch protecting the hook against damage
- stitch length up to 8mm
- lifting height of the rolfus up to 11mm
- 380V clutch motor
Efficient machine removed from production
Minerva 72525
Flat sewing machine with zig stitch - zag
- zigzag stitch width 10mm
- manual reverse
- 380V motor
The machine is in very good technical condition
Adler 167 - 272
2-needle machine
Needle gauge 6mm
Triple transport (needle - tooth - foot)
Large hooks (possibility of heavier sewing)
Manual reverse
380V motor
The machine is busy - ready to sew
Durkopp Adler 267 - 273
2-needle machine
Needle gauge 8mm
Triple transport (needle - tooth - foot)
Large hooks (possibility of heavier sewing)
Manual reverse
380V motor
The machine is busy - ready to sew
DURKOPP ADLER 867 - 190322 - M GOLD
- Triple foot and tooth transport
- Large hook (26mm bobbin)
- Cutting the thread
- Programmable initial and final locking
- Speed reduction system with increased stepping height
- Maximum thread thickness 10/3Nm
- Maximum stitch length up to 12mm (Two separate adjustments that can be switched at any time)
- Foot lifting height up to 20mm
- Adjustable feet stroke up to 9mm
- Needle bar arm length 335mm
- Maximum number of stitches per minute 3800
- 230V motor - Efka Variocontrol 820 control
- Compressed air is needed to operate the machine
Video of the work of such a model: https://www.youtube.com/watch?v=OfwZwB9yQrA&t=3s
The machine is in perfect technical condition - ready to work
CMCI MT05/2N-VD
A machine for decorative sewing of moccasins with a decorative 1-needle or 2-needle stitch with the possibility of gathering.
The construction of the machine allows for sewing closed elements.
Sewing speed 500 stitches/min, stitch length up to 8mm, thread thickness 1.0mm.
Machine patterns visible in the photo
The machine is in perfect condition
Video of the machine in operation: https://www.youtube.com/watch?v=8cpzVbFQ_J8
Minerva 01087 P3
Heavy arm sewing machine Lufa
Extra large hook, bobbin diameter 30mm
Arm length from needle to machine body 560mm
Tooth transport
380V motor
Machine in very good condition ready to work
