USM bridge cutter hydraulic press travelling !!SOLD!!
Traveling press with hammer traveling right / left
Press force 25 Ton
Table dimensions: 1700mm x 530mm
Hammer dimensions: 530mm x 530mm
Traveling press with hammer traveling right / left
Press force 25 Ton
Table dimensions: 1700mm x 530mm
Hammer dimensions: 530mm x 530mm
GFP 500 D1 Perforating machine Punching machine
The GFP D1 perforating machine is designed to perform punching and carving in leather, similar leather, synthetic materials, etc.
With the machine, you can make holes not only round, but also of various shapes, such as squares, rectangles, diamonds, stars, etc.
Die replacement and adjustment is simple and quick, and the waste is sucked into a bag or bin
The work is continuous on the transport paper
Working area: 500mm
The set includes 7 matrices (patterns)
Year of production 2013
Complete documentation of the machine is attached to the machine
The machine has a CE declaration
The machine is in perfect technical condition
Video from the work of this model: https://www.youtube.com/watch?v=9qsTykaTUUg&t=1s
Inflatable pillows
Warm cold
The ability to choose any tooling (women's, men's, children's)
GALLI TCE 3000/2T
Leather belt making machine
Features:
- cutting the beginning and the end of the strip
- punching
Adjusting the impact force, adjusting the width of the belt and the spacing (length of the belt)
We have a lot of accessories for work (one selected set included with the machine)
A short video of this model working: https://www.youtube.com/watch?v=QoaBmgSJ5Aw
The machine is in very good technical condition
Press force of 25 tons
Table dimensions: 900mm x 450mm
Hammer dimensions: 500mm
Max stroke 90mm
Engine power 0.9kW
Weight 960 kg
Year of production: 2016
Overall dimensions of the machine: 900mm x 960mm x 1430mm
Very fast and strong
Two-handed control for safe work
Simple intuitive operation
The machine is in perfect technical condition after the service like NEW!
GALLI TCE 3000 / 2T
Leather belt making machine
Features:
- cutting the beginning and the end of the strip
- punching
Adjusting the impact force, adjusting the width of the belt and the spacing (length of the belt)
We have a lot of accessories for work (one selected set included with the machine)
A short video of this model working: https://www.youtube.com/watch?v=QoaBmgSJ5Aw
The machine is in very good technical condition
Atom SE 25 hydraulic cutter
Press force 25 tons
Table dimensions: 1000mm x 500mm
Hammer dimensions: 500mm
Max stroke 90mm
Engine power 0.9 kW
Weight approx. 1030 kg
Approximate overall dimensions of the machine: 1000mm x 1030mm x 1430mm
Two-handed control for safe work
Simple intuitive operation
Machine operation video: https://www.youtube.com/watch?v=uEv-77rfMoI
The machine is in very good condition after full service
BANF P140
Perforating machine, extruder, hydraulic press
Original Italian product
Working area 750mm x 500mm
Pressure force 140T
Machine weight approx. 1900 kg
Lower heating of the working field
The machine is equipped with an exit table and safety barriers
We have several matrices, I will send photos on request
The machine is in very good technical condition - removed from production
Hydraulic cutting machine Svit 06145 P2
Press force: 18T
Table dimensions: 940mm x 480mm
Hammer dimensions: 360mm
The hammer rides the die with the joystick
Two-handed operation guaranteeing work safety
The machine is in very good condition after the review
Movie from the operation of the machine:
https://www.youtube.com/watch?v=vxVvR7A2ZEo
Strobel 141 - 23 EV
This machine sews insoles with an uppers with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles in leather and textile shoes with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the feeding operation.
Stitch type: single-thread, overcasting
Stitch length: 3 - 8 mm adjustable
Needle system: 134
The machine is in very good condition
Strobel 141 - 23 EV
This machine sews insoles with an uppers with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles in leather and textile shoes with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the feeding operation.
Stitch type: single-thread, overcasting
Stitch length: 3 - 8 mm adjustable
Needle system: 134
The machine is in very good condition