Working area: 470mm
It has an automatic knife approach
Two material feeding speeds
Material feeding: roller - roller / roller - strip
Equipped with the possibility of automatic material retraction
Sample video from the operation of such a machine: https://www.youtube.com/watch?v=XpWMY0G5T8M
The machine is in PERFECT technical condition
Durkopp Adler 4180
Fully automatic bollard machine
- triple roller transport
- locking
- thread cutting
- large hook
The machine is in very good condition
Svit 01337 P2 Eyeletting Machine
Equipped with stitch adjustment (gap between eyelet and eyelet).
Possibility to adapt to the size of the mesh
Sample video from the work of this model: https://www.youtube.com/watch?v=EJHXS2RZl1U&t=1s
The machine is in perfect condition after the review
Fortuna skiving machine
Machine with a clutch - controlling the speed of material feeding
Equipped with a fan and its own waste bin
The machine is in very good condition, ready for operation after full service
Sandt Atom HSP 520/10 bridge cutter - the largest and most powerful model of this type of press
Pressure of 30 tons
Simple, intuitive operation with automatic retraction after cutting
Two-handed operation guaranteeing work safety
Table dimensions: 2000mm x 750mm
Hammer dimensions: 750mm x 750mm
Maximum stroke of the hammer: 150mm
Maximum clearance between the hammer and the table: 188mm
Engine power: 1.87kW
Weight: 2270 kg
Full machine dimensions: 2380mm x 1660mm x 2300mm
The machine is in very good condition after full service
Full manufacturer's documentation for the machine
Schon 8 LMES hydraulic cutting machine
Electronic control (reading the 0 point of the knife, adding / subtracting force, the height of the punch return after cutting, counter of the cuts made)
Press force: 22T
Table dimensions: 900mm x 450mm
Hammer dimensions: 450mm (installed plate is 500mm wide)
Max stroke: 150mm
Two-handed control for safe work
Simple intuitive operation
The machine is in perfect technical condition after general renovation (bearings, sealants, painting, maintenance)
Machine operation video: https://www.youtube.com/watch?v=b2BAHRRCHJE
Pfaff 1493 E1
- roller transport
- full automatic
- thread cutting
- needle positioning
- programmable start and end locking
- stitch length up to 5mm
- 230v power supply
All functions are adjustable from the built-in operator panel
A short video of the machine's operation: https://www.youtube.com/watch?v=hfN6RV92dAs
The machine is in very good condition
Durkopp Adler 267
A high 40cm post - a 1-needle machine
- triple transport
- needle positioning
- manual reverse
Suitable for sewing bags, cases, briefcases, shoes.
The machine is in very good condition
Skiving machine for skiving steep edges between 0° - 45°.
The maximum working width is 11 mm.
Mainly used in the shoe industry, not suitable for shoe uppers.
The 34 S-AG/M was especially developed for skiving steep edges. The skiving angle is stepless setable by quick adjustment. With the overhead feed motor and re-adjustable feed cone an exact automatic work piece guidance is achieved. To ensure an optimal cut the feed speed is stepless adjustable.
Equipped with a fan and its own waste bin
The machine is in very good condition, ready for operation after full service (new knife, sharpener, new bearings, new feeder)
BANF P 900 MAN
Perforating machine, extruder, hydraulic press
Original Italian product
Working area 1050mm x 800mm
Press force 180T
Machine weight 3700 kg
The machine is equipped with an exit table and safety barriers
We have several matrices on request, I will send photos
Video: https://www.youtube.com/watch?v=uA3kXPCYyyU
The machine is in perfect technical condition
Adler 220 - 50 - 73
Machine for very heavy sewing
Length of the arm from the body to the needle 500mm
- triple foot transport
- needle positioning
- manual reverse
- stitch length about 10mm
- hook xxxl
- 380V engine
Machine operation video: https://www.youtube.com/watch?v=EzbwYrfwRzU&t=19s
The machine is in very good condition
Durkopp Adler 1140
Fully automatic flat machine
- triple roller-needle-tooth transport
- locking
- thread cutting
- large hook
- needle positioning
- equipped with a border ruler
All functions are adjustable from the operator panel
Machine operation video: https://www.youtube.com/watch?v=7eDvsTO9CRQ
The machine is in very good condition
