Working area: 400mm
Machine with knife position display
Digital display of the thickness of the divided material
Smooth regulation of material feeding speed
Equipped with waste bin and dust fan
The machine is in PERFECT technical condition
DURKOPP ADLER 867 - 190322 - M GOLD
- Triple foot and tooth transport
- Large hook (26mm bobbin)
- Cutting the thread
- Programmable initial and final locking
- Speed reduction system with increased stepping height
- Maximum thread thickness 10/3Nm
- Maximum stitch length up to 12mm (Two separate adjustments that can be switched at any time)
- Foot lifting height up to 20mm
- Adjustable feet stroke up to 9mm
- Needle bar arm length 335mm
- Maximum number of stitches per minute 3800
- 230V motor - Efka Variocontrol 820 control
- Compressed air is needed to operate the machine
Video of the work of such a model: https://www.youtube.com/watch?v=OfwZwB9yQrA&t=3s
The machine is in perfect technical condition - ready to work
Fortuna UA 305 surface splitting machine - leather splitting machine
Working area: 30cm
The machine is equipped with:
- adjustment of the thickness of the material division
- two speeds of material feeding
- dust extractor and waste basket
Full manufacturer's documentation for the machine
Machine in very good condition after service
Strobel 410 - 1EV
With this machine, the insoles are sewn to the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew insoles in leather and textile footwear. The shirring device facilitates the insertion operation.
Stitch type: single thread, overcast
Double roller transport
Stitch length: 3 - 8 mm adjustable
The machine is in very good technical condition
Fortuna UAF 470 surface splitting machine - leather splitting machine
Working area: 47cm
It has an automatic knife access
Three material feeding speeds
Feeding material on two rollers
The machine is in very good technical condition after a general service
Strobel 141 - 23EV
With this machine, the insoles are sewn to the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the insertion operation.
Stitch type: single thread, overcast
Stitch length: 3 - 8 mm adjustable
Needle system: 134
230V energy-saving motor
The machine is in very good technical condition
DURKOPP ADLER 867 - 190322 - M GOLD
- Triple foot and tooth transport
- Large hook (26mm bobbin)
- Cutting the thread
- Programmable initial and final locking
- Speed reduction system with increased stepping height
- Maximum thread thickness 10/3Nm
- Maximum stitch length up to 12mm (Two separate adjustments that can be switched at any time)
- Foot lifting height up to 20mm
- Adjustable feet stroke up to 9mm
- Needle bar arm length 335mm
- Maximum number of stitches per minute 3800
- 230V motor
- Compressed air is needed to operate the machine
Video of the work of such a model: https://www.youtube.com/watch?v=OfwZwB9yQrA&t=3s
The machine is in perfect technical condition - ready to work
Durkopp Adler 269
Arm machine
1 - needle
- triple foot transport
- large hook
- manual reverse
- power supply 380V
The machine is in very good technical condition
18 tons of pressure
Table dimensions: 800mm x 450mm
Hammer dimensions: 325mm
Very fast and strong
Simple intuitive operation
The machine is in very good condition after the service
Video of the machine in operation: https://www.youtube.com/watch?v=hjuW3MVylg4
The OMAC 600 R linear wrapping machine is equipped with a cold wrapping system for handbags, bags, wallets, diaries, business card holders, etc. Leather and other materials are processed with the equipment.
Features of the OMAC 600R edge bender:
material thickness from 0.2 to 2.0 mm,
bending width adjustment in the range of 4-10 mm,
pressure time adjustment from 0.3 to 10 sec.,
LCD display, microprocessor, self-diagnosis system, programmable
The machine is in very good technical condition
Atom Bridge Cutting Machine HS588/10 hydraulic press
Pressure 30 Tons
Simple, intuitive operation with the function of automatic departure after cutting
Table dimensions: 2000mm x 750mm
Hammer dimensions: 750mm x 750mm
Maximum hammer stroke: 150mm
Maximum clearance between hammer and table: 188mm
Motor power: 1.87kW
Weight: 2270kg
Full dimensions of the machine: 2380mm x 1660mm x 2300mm
The machine is in perfect technical condition after full service
Video of the machine in operation: https://www.youtube.com/watch?v=3DUrnwg86mI
