RFS CO MEC BT 4/4
Perforating machine extruder hydraulic press
Original Italian product
Working area 700mm x 600mm
Press force 300T
Year of production 2015
Machine weight 4500 kg
The machine is equipped with an automatic travel table, safety barriers and upper heating of the working field
We have several matrices on request, I will send photos
The machine is in perfect technical condition
BANF P 900 MAN
Perforating machine, extruder, hydraulic press
Original Italian product
Working area 1050mm x 800mm
Press force 180T
Machine weight 3700 kg
The machine is equipped with an exit table and safety barriers
We have several matrices on request, I will send photos
Video: https://www.youtube.com/watch?v=uA3kXPCYyyU
The machine is in perfect technical condition
SECOM PL 1251 - original Italian product
Perforator extruder hydraulic press
Working area 600mm x 500mm
Pressing force 130T
Machine weight approx. 1000kg
The machine is equipped with an automatic mobile table and bottom heating of the working field (the heating plate can be moved to the top)
Video of the machine in operation: https://www.youtube.com/watch?v=xbJ_ypd9gNw&t=18s
We have several matrices, I will send photos on request
The machine is in perfect technical condition
GFP 500 D1 Perforating machine Punching machine
The GFP D1 perforating machine is designed to perform punching and carving in leather, similar leather, synthetic materials, etc.
With the machine, you can make holes not only round, but also of various shapes, such as squares, rectangles, diamonds, stars, etc.
Die replacement and adjustment is simple and quick, and the waste is sucked into a bag or bin
The work is continuous on the transport paper
Working area: 500mm
The set includes 7 matrices (patterns)
Year of production 2013
Complete documentation of the machine is attached to the machine
The machine has a CE declaration
The machine is in perfect technical condition
Video from the work of this model: https://www.youtube.com/watch?v=9qsTykaTUUg&t=1s
GALLI TCE 3000 / 2T
Leather belt making machine
Features:
- cutting the beginning and the end of the strip
- punching
Adjusting the impact force, adjusting the width of the belt and the spacing (length of the belt)
We have a lot of accessories for work (one selected set included with the machine)
A short video of this model working: https://www.youtube.com/watch?v=QoaBmgSJ5Aw
The machine is in very good technical condition
Nadir / Ares VF 55 hydraulic cutting machine
Pressing force 20 Tons
Table dimensions: 900mm x 450mm
Hammer dimensions: 380mm
Max stroke 80mm
Very fast and powerful
Two-hand control for work safety
Simple intuitive operation
The machine is in perfect technical condition after service
We have several pieces of this model
Svit 06145 P2 Hydraulic Cutting Machine
Pressing force: 20T
Table dimensions: 940mm x 480mm
Hammer dimensions: 360mm
Max stroke: 60mm
Movement of the hammer onto the punching die using the joystick
Two-handed operation for work safety
Machine dimensions:
- width 940mm
- depth 1040mm
-height 1428mm
Full manufacturer's documentation for the machine
The machine is in very good technical condition after full service
Video of this model working:
https://www.youtube.com/watch?v=vxVvR7A2ZEo
We still have dozens of pieces of this model in stock! Machines in constant preparation for the customer
Muller & Kurth RT05 300
A machine for cutting leather and soft and medium-hard materials into strips, a multi-blade stripper
Original German product
The machine is equipped with 6 rollers that allow you to develop 6 different cutting widths for your needs, smoothly shifting the roller that is needed at a given moment.
Width of the working field: 300mm - the left side of the working field is open, thanks to which the cut material can be wider than the width of the working field.
The machine is in very good technical condition
Ares E22G CE Green Power
Electric cutting press with front/rear moving table
The most technologically advanced model available on the market
– fully electric without oil seals, pump, motor, flywheel, etc
– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance
– ecological production system that respects the environment and is characterized by low CO2 emissions
-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter
– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase
Ares E23G Green Power
Electric cutting press with a swinging head
The most technologically advanced model available on the market
– fully electric without oil seals, pump, motor, flywheel, etc
– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance
– ecological production system that respects the environment and is characterized by low CO2 emissions
-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter
– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase
OMAC 995 F
Tape cutting machine
Perfect for cutting Velcro, fabric, rubber, paper and reflective tape
The machine is equipped with a control panel where we can adjust:
- length of the cut material
- regulation of the number of cut elements
- cutting speed adjustment
The machine is in perfect technical condition
Video of the machine working: https://www.youtube.com/watch?v=3pUhxFswg5c
ATOM VS 922 hydraulic cutting machine
Pressing force 20Ton
2 cutting programs without each adjustment when changing the knife length
Table dimensions: 900mm x 430mm
Hammer dimensions: 370mm
Max stroke 90mm
Engine power 0.9kW
Weight approximately 700 kg
Total dimensions of the machine: 900mm x 900mm x 1430mm
Very fast and powerful
Two-handed control guarantees safe operation
Simple, intuitive operation
The machine is in perfect technical condition after service
Video of the machine working: https://www.youtube.com/watch?v=t8RpxusXiI4
