Schoen + Sandt 650
Cutting machine - Hydraulic cutting machine with a returning hammer
Solid German production
Pressing force: 100T
Working area: 2500mm x 1050mm
Weight: 11000kg
Full manufacturer's documentation for the machine
Video of the machine working: https://www.youtube.com/watch?v=1DzR4k-5ci8
The machine is in perfect technical condition after full service
Colli GP 7 Excess material cutter
The machine is equipped with an appropriate knife sharpening device.
The machine is in very good technical condition
Kaev G1650A CE hydraulic bridge cutting machine
Pressing force 25 tons
Table dimensions: 1600mm x 500mm
Hammer dimensions: 500mm x 500mm
Weight 1400 kg
Very fast and powerful
Two-handed control guarantees safe operation
Simple, intuitive operation with automatic departure function after cutting
Full manufacturer's documentation for the machine
Video of this model in operation: https://www.youtube.com/watch?v=ZJa1s5Fx3r4
The machine is in perfect technical condition after service
Ares E22G CE Green Power
Electric cutting press with front/rear moving table
The most technologically advanced model available on the market
– fully electric without oil seals, pump, motor, flywheel, etc
– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance
– ecological production system that respects the environment and is characterized by low CO2 emissions
-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter
– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase
Ares E23G Green Power
Electric cutting press with a swinging head
The most technologically advanced model available on the market
– fully electric without oil seals, pump, motor, flywheel, etc
– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance
– ecological production system that respects the environment and is characterized by low CO2 emissions
-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter
– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase
COMPART 13005 cutting machine
Hydraulic press for cutting various types of materials using a die
Pressing force: 18 Tons
Table dimensions: 92cm x 42cm
Hammer dimensions: 32cm x 48cm
Engine power: 1.1kW
Weight 1050 kg
The machine has been fully technically serviced
Atom S117 hydraulic cutting machine
Pressing force 17Ton
Table dimensions: 1000mm x 500mm
Hammer dimensions: 370mm
Max stroke 80mm
Very fast and powerful
Two-handed control guarantees safe operation
Simple, intuitive operation
The machine is in perfect technical condition after service
ZUND LC 2400 Optima
A plotter for cutting leather and leather-like materials from the renowned Swiss company ZUND
Year of production 2009
Included :
Cutting software
Projector
Working surface 2400x1000 mm inclined at an angle of 10°, powerful multi-zone vacuum system to hold the material, space for materials in rolls.
The machine is in very good technical condition, ready to work
Video of such a model in operation: https://www.youtube.com/watch?v=97i9peR325k
OMAC 995 F
Tape cutting machine
Perfect for cutting Velcro, fabric, rubber, paper and reflective tape
The machine is equipped with a control panel where we can adjust:
- length of the cut material
- regulation of the number of cut elements
- cutting speed adjustment
The machine is in perfect technical condition
Video of the machine working: https://www.youtube.com/watch?v=3pUhxFswg5c
Atom SP588 bridge cutter / 3 hydraulic press
Simple, intuitive operation with automatic departure function after cutting
Pressure 25Ton
Table dimensions: 1600mm x 500mm
Hammer dimensions: 500mm x 500mm
Maximum hammer stroke: 100mm
Maximum clearance between hammer and table: 143mm
Installed power: 1.5kW
Weight: 1430kg
Full machine dimensions: 1960mm x 1460mm x 2010mm
Full manufacturer's documentation for the machine
The machine is in perfect technical condition after full service
Video of this model in operation: https://www.youtube.com/watch?v=w4_1IARCw5U
BANF P140
Perforating machine, extruder, hydraulic press
Original Italian product
Working area 750mm x 500mm
Pressure force 140T
Machine weight approx. 1900 kg
Lower heating of the working field
The machine is equipped with an exit table and safety barriers
We have several matrices, I will send photos on request
The machine is in very good technical condition - removed from production
