Ciucani XM 747

Moccasin sewing machine

XM747 is an ecological and extremely efficient solution, allowing for significant savings in time, materials and necessary labor (comparable to the work of 25-30 manual sewers), while guaranteeing the same quality as when sewing shoes manually.

Machine in perfect technical condition

Svit 03028 P11 Double-thread sewing machine

A two-thread sewing machine is used in the production process of Goodyear footwear for sewing the sole of the shoe to the upper.

Possibility of sewing light and heavy up to 20mm thick

Video of the operation of such a machine: https://www.youtube.com/watch?v=CBIb5ZtpXJw

Machine in very good technical condition

Maier 68/1 - grinder and knife sharpener for sewing machines

A grinder that meets the highest requirements regarding the sharpening effect achieved.

Station version for table mounting, with two workstations, forward/reverse rotation switch, left tilting arm with a precise adjustment screw enabling minimum feed with an accuracy of 0.02 mm.

The shaft is driven by a V-belt.

The left side is standardly equipped with a 51/1 pot grinding wheel intended for precise sharpening. The use of appropriate optionally available equipment allows you to sharpen a very wide range of knives for machines and devices. The right side is standardly equipped with a 52/1 flat grinding wheel and is intended for sharpening, grinding and smoothing.

The machine is in very good technical condition

Colli GP 7 trimming machine

The machine is equipped with an appropriate knife sharpening device.

Video of this model in operation: https://www.youtube.com/shorts/ZjGVXzNbpBU

The machine is in very good technical condition

CMCI MB50 Falan FT70

Original Italian product

A sewing machine for moccasin-type shoes, significantly speeds up production compared to traditional hand sewing

Technical characteristics

Speed: 400 stitches/min

Stitch length: max. 8 mm

Threads: from 0.4 mm to max. 1.0 mm waxed

Needle system: 794

Motor: EFKA DC 1550 control - 220V 50/60 Hz

Motor power: 750 kW

Full manufacturer's documentation and CE declaration included

New machine! - only start-up tests performed on the machine

The painting booth allows for the application of water-based paints with a hand-held spray gun.

The booth has:

- a water curtain

- its own dust extraction (0.37kW)

- it is equipped with local lighting of the working chamber

- a spray gun

The machine is in very good technical condition

Galli EGM

A machine for the production of a leather belt - a machine used to close belt loops using a decorative staple

A manual machine

The machine is efficient - ready to work

Colli GP 15S

A powerful excess material cutter

Ideal for trimming bags, suitcases, collars, belts, excess material in the upper after sewing.

The machine is equipped with a suitable device for sharpening the knife.

The machine is equipped with a motor with smooth adjustment of the material feeder speed

The machine is in very good technical condition

Mark MKH1 - DH

Hook insertion machine - hooker

Three-channel machine for automatic feeding of rivets, hooks and washers. Particularly suitable for use on footwear and sports or military shoes, has a pneumatic action.

Sample of work performed visible in the photos

Short film of the machine operation: https://www.youtube.com/watch?v=vZFPImAE0bY

Machine in very good technical condition

Mechanical riveter - SIAC riveting machine

Original Italian product

Machine set for rivets with a head diameter of 7mm

Machine equipped with:

automatic rivet feeder

counter of completed cycles

230V power supply

Video of the machine working: https://www.youtube.com/shorts/q2ag5Adub2A

Machine in very good technical condition, ready to work