CIUCANI MC11 UMB 01

Original Italian product

This is a convertible "BLAKE" needle machine for sewing shoe soles.

Equipped with a 360-degree electric rotating arm that allows you to sew in the most inaccessible places.

The ability to install needles with a thickness of 120 to 200 allows you to sew with both thick and thin threads.

- stitch length up to 8mm

- needle positioning

- 230V power supply + compressed air

The machine is in very good technical condition after inspection

GALLI TCE 3000 / 2T

Leather belt making machine

Features:

- cutting the beginning and the end of the strip

- punching

Adjusting the impact force, adjusting the width of the belt and the spacing (length of the belt)

We have a lot of accessories for work (one selected set included with the machine)

A short video of this model working: https://www.youtube.com/watch?v=QoaBmgSJ5Aw

The machine is in very good technical condition

Strobel 141 - 23EV

This machine sews the insoles to the upper with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. This machine can be used to sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The gathering device facilitates the insertion operation.

Stitch type: single-thread, overcast

Stitch length: 3 - 8 mm adjustable

Needle system: 134

Energy-saving 230V motor

The machine is in very good technical condition

Durkopp Adler 205 - 370 (heaviest in its class)

Arm machine

1 - needle

- triple foot transport

- large catcher (duck)

- pneumatic reverser

- pneumatic presser foot lifting

- needle positioning

- 230V power supply + compressed air

We have several pieces of this model

The machine is in very good technical condition

Video of this model in operation: https://www.youtube.com/watch?v=hTfnW9yIlYU

Durkopp Adler 205 - 370 (heaviest in its class)

Arm machine

1 - needle

- triple foot transport

- large catcher (duck)

- pneumatic reverser

- pneumatic presser foot lifting

- needle positioning

- 380V power supply + compressed air

We have several pieces of this model

The machine is in very good technical condition

Video of this model in operation: https://www.youtube.com/watch?v=hTfnW9yIlYU

CMCI M91/1F-AC

A machine for connecting the upper with the bottom in the system: IDEAL, CALIFORNIA, S.CRISPINO and for decorative hemming of the bottoms made of materials: TR, PU. Sewing speed 500 st/min, stitch length up to 9mm, thread thickness 1.2mm

Machine in very good condition

Mario Angeleri - gluing machine / roller fusing machine

Working area 500mm x 50mm

Water-based/latex adhesive application machine

It has an adjustable amount of glue supply

One constant feed rate

Machine removed from production in very good technical condition

Durkopp Adler 4181

Fully automatic bar machine

- manual and automatic locking

- thread cutting

- lower material cutter

- needle positioning

- 230V power supply

All functions adjustable in the EFKA 810 operator panel

The machine is in very good condition

Strobel 141 - 23EV

This machine sews the insoles to the upper with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. This machine can be used to sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The gathering device facilitates the insertion operation.

Stitch type: single-thread, overcast

Stitch length: 3 - 8 mm adjustable

Needle system: 134

Energy-saving 230V motor

The machine is in very good technical condition

Galli TGV 20.5 CE Strip dryer tunnel + RC200 CE strip striper

Dryer for leather goods

Transport speed control

electronic temperature control;

Maximum temperature - 150 degrees

+

Horizontal machine for double-sided edge dyeing

Manufacturer's documentation for the machine