Pema 086
40cm high column - 1-needle machine
- large looper
- needle-foot feed (lower loose roller)
- needle positioning
- manual reverse
- 380V motor
Suitable for sewing bags, cases, briefcases, shoes.
Video of this type of machine in operation: https://www.youtube.com/watch?v=HZ2qFAqZ8t8
Machine in very good technical condition, ready to work
Strobel 410 - 1 EV
This machine sews the insoles with the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. With this machine, we can sew the insoles in leather and textile shoes.
The gathering device makes the insertion operation easier.
Type of stitch: single-thread, overcast
Stitch length: 3 - 8 mm adjustable
Video of the machine in operation: https://www.youtube.com/shorts/UBGvBw4nTqo
Machine in very good technical condition
DURKOPP ADLER 467 - 65
Long-arm sewing machine 2 - needle (needle spacing 14mm)
Ideal machine for sewing large and heavy materials such as furniture upholstery, car upholstery, sails, mattresses, etc.
- Triple foot-tooth feed
- Needle spacing 14mm
- Large loopers (26mm bobbin)
- Thread cutting
- Stitch length up to 10mm
- Programmable initial and final locking
- Maximum thread thickness 10/3Nm
- Presser foot lifting height up to 20mm
- Needle bar arm length 650mm
- 230V motor
- Compressed air required for machine operation
Movie of machine operation: https://www.youtube.com/shorts/2YJrqFY8PFY
Machine in very good technical condition, ready to work
Stema TC04 - shoe heater with steam
Machine equipped with temperature and steam quantity control
Machine like new in perfect technical condition
Stema - original Italian product
Steamer / upper tip activator - machine for activating the front part of the upper before studding
Steaming up and down (the best version of this type of machine)
A short film of the machine working: https://www.youtube.com/shorts/oqQ_9lUzOT0
The machine is in perfect technical condition, like new!
Colli GP 15S
A powerful excess material cutter
Ideal for trimming bags, suitcases, collars, belts, excess material in the upper after sewing.
The machine is equipped with a suitable device for sharpening the knife.
The machine is equipped with a motor with smooth adjustment of the material feeder speed
The machine is in very good technical condition
Ellegi GL 23
Machine for cutting leather into strips multi-knife strapping machine
Working area width: 300mm
Working speed regulated by foot pedal
Power supply 380V
Machine in very good technical condition after full service
Video of the machine operation: https://www.youtube.com/watch?v=TaIns1acyEM&t=68s
Skiving machine Fortuna ES 50 CE - original German product
A machine used in the leather industry for thinning the edges of materials such as leather, synthetic materials, leather-like materials, textiles, etc.
Equipment and functions:
- electronic motor for speed regulation
- possibility of continuous operation (built-in speed inverter) or regulated with a foot pedal
- adjustment of thickness, width and working angle
- machine equipped with a powerful fan and waste basket
- knife position indicator
- a full service kit included with the machine
Machine in perfect technical condition with minimal traces of use
Minerva 72527 Durkopp Adler
Flat stitch sewing machine with zig-zag stitch
Maximum stitch width up to 10mm
Maximum stitch length up to 5mm
Manual reverse
Power supply 230V
A short film of the machine in operation: https://www.youtube.com/watch?v=Ff3oLbYhTlQ
Machine in very good technical condition
Suteau Anver XPM CE - hydraulic press, cutting machine, die for cutting various types of soft or medium-hard materials such as: foam, sponge, rubber, felt, leather, cardboard, etc.
Solid French production
Pressure force: 100 Tons
Working area: 1600mm x 800mm
Max stroke: 120mm
Max clearance between hammer and table: 150mm
Weight: approx. 6400kg
Full manufacturer's documentation for the machine
Video of this model working: https://www.youtube.com/watch?v=OGHbkYg5YAE
Machine in very good technical condition after full service
