Machine for wrapping pallets with stretch foil
TABLE
Diameter 1650mm.
Pallet size up to: 1200x1000 mm.
Pallet weight up to: 2000 kg.
Type of table: flat
Rotation speed: 4-13 rpm.
Efficiency up to 30 pallets / 1h.
MAST
Wrapping height up to: 2100 mm.
HEAD
FM Electro-magnetic
Film tension: adjustable
The machine is in very good condition, ready for operation after the service
Durkopp Adler 205 - 370 (the heaviest in its class)
The shoulder machine
1 - needle
- triple foot transport
- large hook (duck)
- pneumatic reverse
- pneumatic foot lifting
- automatic start and end locking
- needle positioning
- 380V power supply
We have several pieces of this model
The machine is in perfect technical condition
Video from the work of such a model: https://www.youtube.com/watch?v=hTfnW9yIlYU
Durkopp Adler 888 Classic
Triple roller transport
Large hook
Thread cutting
Manual reverse
Programmable initial and final locking
230V engine
The machine is in perfect technical condition
Durkopp Adler 888 Classic
Triple roller transport
Large hook
Thread cutting
Manual reverse
Programmable initial and final locking
Bottom material cutter
230V engine
The machine is in perfect technical condition
ABAC PRO B5900B 270 CT5.5
4 kW engine
270l tank
Maximum pressure 11 bar
Number of cylinders 2
Compressor in perfect condition, like new, bought in 2022, used for several hours
FIPI F40 hydraulic cutter
Pressure force of 20 tons
Table dimensions: 900mm x 450mm
Hammer dimensions: 370mm
380V power supply
Weight approx. 1000 kg
Two-handed control for safe work
Simple intuitive operation
The machine is in very good condition after the service
Video from the work of this model: https://www.youtube.com/watch?v=0GmsIbm-q7M
Vifama V92
Inflatable pillows
Warm cold
Possibility to choose any tooling (women, men, children)
The machine is in very good condition, ready for operation after the service
Strobel 141 - 23 EV
This machine sews the insoles with the upper with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles in leather and textile shoes with a total thickness of the sewn layer up to 7 mm.
Stitch type: single-thread, overcasting
Stitch length: 3 - 8 mm adjustable
Needle system: 134
The machine is in very good condition
A new rubber splitting machine from the renowned Italian manufacturer Sagitta
Video: https://www.youtube.com/watch?v=s-UiiH9VvtU
Technical Data
Maximum cutting thickness 8 mm.
Minimum cutting thickness 0,5 mm.
Control panel with digital thickness indicator
Manual Knife positioning
Sharpening device pressure adjustable with micrometric drive
Three manual feed speeds (1,1 – 1,8 – 2,6 mt./min.)
Knife tension indicator
Self adjusting knife guide plate
Upper and lower motor driven steel feed rollers
High precision knife guides
Optical device to control the chamfer position and symmetry
Automatic lubrication bandknife
Maximum absorbed power 2 kW
Three-phase power supply 400 Volt 50/60 Hz.
RSP55 SX is an electronic splitting machine for polyurethane, rubber, plastic and other elastomers
Video: https://www.youtube.com/watch?v=7BPjkDuTgy4
Folding Machine
Video: https://www.youtube.com/watch?v=jU3m1rAIOVc&t=1s
Upper thermocementing and folding machine, photocells controlled, complete with table and clutch motor.
Automatic controls by photocells:
– cement fow and adjustable delay
– feeding for external curves with progammable delay according to the speed
– feeding for internal curves with progammable delay according to the speed and automatic cutting with adjustable step
– easy selection of photosensor according to the geometry of the working leather uppers.
Computerised thermocementing and folding machine with photocells and microprocessors. It is able to fit the requirements of any single operator since this machine is able to self store commands while making the first piece of work and then repeat these ones accurately leaving to the operator only the task to guide the piece of work. The RP NOVA V4 controls the glue flow very accurately and delivers it inside the folding, in thread shape. At the end of each working cycle, the machine stops with the hammer in an open position and sets in the automatic glue suction, preventing the glue from falling down on the upper and consequently stain it.
