Sandt Atom HSP 520/10 bridge cutter - the largest and most powerful model of this type of press

Pressure of 30 tons

Simple, intuitive operation with automatic retraction after cutting

Two-handed operation guaranteeing work safety

Table dimensions: 2000mm x 750mm

Hammer dimensions: 750mm x 750mm

Maximum stroke of the hammer: 150mm

Maximum clearance between the hammer and the table: 188mm

Engine power: 1.87kW

Weight: 2270 kg

Full machine dimensions: 2380mm x 1660mm x 2300mm

The machine is in very good condition after full service

Full manufacturer's documentation for the machine

Schon 8 LMES hydraulic cutting machine

Electronic control (reading the 0 point of the knife, adding / subtracting force, the height of the punch return after cutting, counter of the cuts made)

Press force: 22T

Table dimensions: 900mm x 450mm

Hammer dimensions: 450mm (installed plate is 500mm wide)

Max stroke: 150mm

Two-handed control for safe work

Simple intuitive operation

The machine is in perfect technical condition after general renovation (bearings, sealants, painting, maintenance)

Machine operation video: https://www.youtube.com/watch?v=b2BAHRRCHJE

Pfaff 1493 E1

- roller transport

- full automatic

- thread cutting

- needle positioning

- programmable start and end locking

- stitch length up to 5mm

- 230v power supply

All functions are adjustable from the built-in operator panel

A short video of the machine's operation: https://www.youtube.com/watch?v=hfN6RV92dAs

The machine is in very good condition

Durkopp Adler 267

A high 40cm post - a 1-needle machine

- triple transport

- needle positioning

- manual reverse

Suitable for sewing bags, cases, briefcases, shoes.

The machine is in very good condition

Skiving machine for skiving steep edges between 0° - 45°.
The maximum working width is 11 mm.
Mainly used in the shoe industry, not suitable for shoe uppers.
The 34 S-AG/M was especially developed for skiving steep edges. The skiving angle is stepless setable by quick adjustment. With the overhead feed motor and re-adjustable feed cone an exact automatic work piece guidance is achieved. To ensure an optimal cut the feed speed is stepless adjustable.

Equipped with a fan and its own waste bin

The machine is in very good condition, ready for operation after full service (new knife, sharpener, new bearings, new feeder)

BANF P 900 MAN

Perforating machine, extruder, hydraulic press

Original Italian product

Working area 1050mm x 800mm

Press force 180T

Machine weight 3700 kg

The machine is equipped with an exit table and safety barriers

We have several matrices on request, I will send photos

Video: https://www.youtube.com/watch?v=uA3kXPCYyyU

The machine is in perfect technical condition

Adler 220 - 50 - 73

Machine for very heavy sewing

Length of the arm from the body to the needle 500mm

- triple foot transport

- needle positioning

- manual reverse

- stitch length about 10mm

- hook xxxl

- 380V engine

Machine operation video: https://www.youtube.com/watch?v=EzbwYrfwRzU&t=19s

The machine is in very good condition

Durkopp Adler 1140

Fully automatic flat machine

- triple roller-needle-tooth transport

- locking

- thread cutting

- large hook

- needle positioning

- equipped with a border ruler

All functions are adjustable from the operator panel

Machine operation video: https://www.youtube.com/watch?v=7eDvsTO9CRQ

The machine is in very good condition

GALLI TCE3000 / 2T

Machine for the production of a leather belt

It has functions:

- cutting the beginning and end of the strip

- punching

- marking with logo / numbering coloring foil

Regulation of the impact force, stamping time and temperature as well as the spacing (length of the strip)

A short movie about the operation of the machine: https://www.youtube.com/watch?v=QoaBmgSJ5Aw

The machine is in very good condition

Skiving Machine Atom GL 12 S

Machine with the possibility of clutch operation or smooth speed regulation - all regulated by independent potentiometers

It is also equipped with a speed control of the knife rotation

Working width up to 50mm

Manual adjustment of thickness, width and angle of work

Equipped with a fan and its own waste bin

The machine is in perfect condition - like new! (she was a backup machine on the company)

Pfaff 646

2 - needle machine on a long arm with a needle gauge of 2.4 mm (possible installation of 14mm or 20mm spacing)

- triple foot transport

- manual reverse

- needle positioning

- 380V engine

The machine is in perfect technical condition

Ring roller machine for punching eyelets JOVER

Spanish product

20mm mesh diameter

Machine operation video: https://www.youtube.com/watch?v=t0rR8ejxf28

The machine is in very good condition