Camoga C620 surface splitting machine - leather splitting machine
Main features of the machine:
- working area: 620mm
- automatic knife positioning
- display of the thickness of the split material
- smooth regulation of the material feed speed
- machine error codes
- dust absorber and waste basket
Machine in very good technical condition after full service
Video of the machine operation: https://www.youtube.com/watch?v=DpL_LBict3U
Adler 204 - 102
Flatbed 2-needle machine (needle spacing 8mm) for heavy sewing
- large "duck" looper
- needle-tooth feed + presser foot
- manual reverse
- 380V power supply
Video of the machine working: https://www.youtube.com/shorts/KLkK4K-rDpQ
Machine in very good technical condition
Galli EGM
A machine for the production of a leather belt - a machine used to close belt loops using a decorative staple
A manual machine
The machine is efficient - ready to work
Pegasus EXT5214H-55
High-speed 4-thread overlock with walking foot
It is designed for decorative chain stitching of carpet edges and other products made of heavy and very heavy materials
Ideal for sewing furniture upholstery
Central lubrication
Equipped with dust extraction
Pneumatic presser foot lift
Energy-saving 230V motor
Video of the machine in operation: https://www.youtube.com/watch?v=VfYRPpLJCSE
Machine in very good technical condition
We have two such machines
Pema 086
40cm high column - 1-needle machine
- large looper
- needle-foot feed (lower loose roller)
- needle positioning
- manual reverse
- 380V motor
Suitable for sewing bags, cases, briefcases, shoes.
Video of this type of machine in operation: https://www.youtube.com/watch?v=HZ2qFAqZ8t8
Machine in very good technical condition, ready to work
Strobel 410 - 1 EV
This machine sews the insoles with the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. With this machine, we can sew the insoles in leather and textile shoes.
The gathering device makes the insertion operation easier.
Type of stitch: single-thread, overcast
Stitch length: 3 - 8 mm adjustable
Video of the machine in operation: https://www.youtube.com/shorts/UBGvBw4nTqo
Machine in very good technical condition
DURKOPP ADLER 467 - 65
Long-arm sewing machine 2 - needle (needle spacing 14mm)
Ideal machine for sewing large and heavy materials such as furniture upholstery, car upholstery, sails, mattresses, etc.
- Triple foot-tooth feed
- Needle spacing 14mm
- Large loopers (26mm bobbin)
- Thread cutting
- Stitch length up to 10mm
- Programmable initial and final locking
- Maximum thread thickness 10/3Nm
- Presser foot lifting height up to 20mm
- Needle bar arm length 650mm
- 230V motor
- Compressed air required for machine operation
Movie of machine operation: https://www.youtube.com/shorts/2YJrqFY8PFY
Machine in very good technical condition, ready to work
Stema TC04 - shoe heater with steam
Machine equipped with temperature and steam quantity control
Machine like new in perfect technical condition
Stema - original Italian product
Steamer / upper tip activator - machine for activating the front part of the upper before studding
Steaming up and down (the best version of this type of machine)
A short film of the machine working: https://www.youtube.com/shorts/oqQ_9lUzOT0
The machine is in perfect technical condition, like new!
Colli GP 15S
A powerful excess material cutter
Ideal for trimming bags, suitcases, collars, belts, excess material in the upper after sewing.
The machine is equipped with a suitable device for sharpening the knife.
The machine is equipped with a motor with smooth adjustment of the material feeder speed
The machine is in very good technical condition
Ellegi GL 23
Machine for cutting leather into strips multi-knife strapping machine
Working area width: 300mm
Working speed regulated by foot pedal
Power supply 380V
Machine in very good technical condition after full service
Video of the machine operation: https://www.youtube.com/watch?v=TaIns1acyEM&t=68s
Skiving machine Fortuna ES 50 CE - original German product
A machine used in the leather industry for thinning the edges of materials such as leather, synthetic materials, leather-like materials, textiles, etc.
Equipment and functions:
- electronic motor for speed regulation
- possibility of continuous operation (built-in speed inverter) or regulated with a foot pedal
- adjustment of thickness, width and working angle
- machine equipped with a powerful fan and waste basket
- knife position indicator
- a full service kit included with the machine
Machine in perfect technical condition with minimal traces of use
