Durkopp Adler 768 - 274
1-needle machine
Triple foot transport (stitch length up to 10mm)
Large hook
Initial and final locking
Needle positioning
Energy-saving EFKA 230V motor + EFKA Variocontrol 820 operator panel
The machine is in perfect technical condition
ZANELLATI + ZANETTI
The machine is used to burn the edges of bags, belts and all other leather items. Used for the production of accessories for leather goods, footwear, furniture accessories, decorative articles for cars and boats, watch straps.
The machine is in very good condition
Durkopp Adler 550 - 12 - 24
Sewing machine for gathering furniture fabrics with the possibility of sewing in a reinforcing ribbon.
1-needle machine with a double-thread chain stitch, with differential bottom (tooth) feed, alternatively with differential upper presser foot. The machine has an electro-pneumatic foot lift, electronic programming of smooth seams or shirring.
Presser foot lift up to 7mm
Lifting the walking foot up to 15mm
Durkopp Adler 195 - 671110 - is an efficient and fast machine with elastic chain stitch
Kyotex is an innovative and environmentally friendly adhesive system used by major Italian and European footwear and purse makers for a wide range of applications, in particular for the attachment of a shoe insole.
It is based on a combination of an innovative, high-performance self-adhesive film.
Full manufacturer's documentation for the machine
Video from the operation of the machine: https://www.youtube.com/watch?v=A1Sx2LZ_3ik
The machine is in perfect technical condition
Garudan GP 510 6 - 141
Post sewing machine
- triple transport
- safety clutch protecting the hook against damage
- stitch length up to 8mm
- lifting height of the rolfus up to 11mm
- 380V clutch motor
Efficient machine removed from production
Minerva 72525
Flat sewing machine with zig stitch - zag
- zigzag stitch width 10mm
- manual reverse
- 380V motor
The machine is in very good technical condition
Folding Machine
Video: https://www.youtube.com/watch?v=jU3m1rAIOVc&t=1s
Upper thermocementing and folding machine, photocells controlled, complete with table and clutch motor.
Automatic controls by photocells:
– cement fow and adjustable delay
– feeding for external curves with progammable delay according to the speed
– feeding for internal curves with progammable delay according to the speed and automatic cutting with adjustable step
– easy selection of photosensor according to the geometry of the working leather uppers.
CMCI MT05/2N-VD
A machine for decorative sewing of moccasins with a decorative 1-needle or 2-needle stitch with the possibility of gathering.
The construction of the machine allows for sewing closed elements.
Sewing speed 500 stitches/min, stitch length up to 8mm, thread thickness 1.0mm.
Machine patterns visible in the photo
The machine is in perfect condition
Video of the machine in operation: https://www.youtube.com/watch?v=8cpzVbFQ_J8
Computerised thermocementing and folding machine with photocells and microprocessors. It is able to fit the requirements of any single operator since this machine is able to self store commands while making the first piece of work and then repeat these ones accurately leaving to the operator only the task to guide the piece of work. The RP NOVA V4 controls the glue flow very accurately and delivers it inside the folding, in thread shape. At the end of each working cycle, the machine stops with the hammer in an open position and sets in the automatic glue suction, preventing the glue from falling down on the upper and consequently stain it.
Minerva 72317
Arm sewing machine with binding function
- triple transport
- manual reverser
- 380V motor
The machine is ready to work
