Sewing and auxiliary machines
Active filters
Minerva Zyg Zak Durkopp Adler Pfaff sewing machine
Minerva 72525
Flat sewing machine with zig stitch - zag
- zigzag stitch width 10mm
- manual reverse
- 380V motor
The machine is in very good technical condition
Kyotex KYO100 gluing machine, gluing machine for footwear insoles
Kyotex is an innovative and environmentally friendly adhesive system used by major Italian and European footwear and purse makers for a wide range of applications, in particular for the attachment of a shoe insole.
It is based on a combination of an innovative, high-performance self-adhesive film.
Full manufacturer's documentation for the machine
Video from the operation of the machine: https://www.youtube.com/watch?v=A1Sx2LZ_3ik
The machine is in perfect technical condition
CMCI MT05 Moccasin sewing machine Ciucani
CMCI MT05/2N-VD
A machine for decorative sewing of moccasins with a decorative 1-needle or 2-needle stitch with the possibility of gathering.
The construction of the machine allows for sewing closed elements.
Sewing speed 500 stitches/min, stitch length up to 8mm, thread thickness 1.0mm.
Machine patterns visible in the photo
The machine is in perfect condition
Video of the machine in operation: https://www.youtube.com/watch?v=8cpzVbFQ_J8
Sagitta RP 67 TF3B-N µP Upper thermocementing and folding machine
Folding Machine
Video: https://www.youtube.com/watch?v=jU3m1rAIOVc&t=1s
Upper thermocementing and folding machine, photocells controlled, complete with table and clutch motor.
Automatic controls by photocells:
– cement fow and adjustable delay
– feeding for external curves with progammable delay according to the speed
– feeding for internal curves with progammable delay according to the speed and automatic cutting with adjustable step
– easy selection of photosensor according to the geometry of the working leather uppers.
Ciucani MC11 UMB for sewing shoe soles
CIUCANI MC11 UMB 01
Original Italian product
This is a convertible "BLAKE" needle machine for sewing shoe soles.
Equipped with a 360-degree electric rotating arm that allows you to sew in the most inaccessible places.
The ability to install needles with a thickness of 120 to 200 allows you to sew with both thick and thin threads.
- stitch length up to 8mm
- needle positioning
- 230V power supply + compressed air
The machine is in very good technical condition after inspection
Sagitta RP NOVA V4 Computerised thermocementing and folding machine
Computerised thermocementing and folding machine with photocells and microprocessors. It is able to fit the requirements of any single operator since this machine is able to self store commands while making the first piece of work and then repeat these ones accurately leaving to the operator only the task to guide the piece of work. The RP NOVA V4 controls the glue flow very accurately and delivers it inside the folding, in thread shape. At the end of each working cycle, the machine stops with the hammer in an open position and sets in the automatic glue suction, preventing the glue from falling down on the upper and consequently stain it.
Strobel 141-23 EV Sewing machine 230v
Strobel 141 - 23EV
This machine sews the insoles to the upper with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. This machine can be used to sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The gathering device facilitates the insertion operation.
Stitch type: single-thread, overcast
Stitch length: 3 - 8 mm adjustable
Needle system: 134
Energy-saving 230V motor
The machine is in very good technical condition
Sagitta RP 68 TE µP Thermocementing and folding machine for Insole
Thermocementing and folding machine for Insole covering complete with table and clutch motor. RP 68 TE is equiped with a foot holder adjust able in heigh and a foot that can run into its own housing so that to process easily, with some further optional parts, the anatomic insoles as well.
Video: https://www.youtube.com/watch?v=b2yfcTgiJrQ&t=11s
Durkopp Adler 4181 lockstitch sewing machine
Durkopp Adler 4181
Fully automatic bar machine
- manual and automatic locking
- thread cutting
- lower material cutter
- needle positioning
- 230V power supply
All functions adjustable in the EFKA 810 operator panel
The machine is in very good condition
Colli BS 3 seam tapping machine
Colli BS 3
Seam maker with a heated arm
The machine is in very good condition
GFP 500 D1 Perforating Machine Punching Machine Ormac Gilardi
GFP 500 D1 Perforating machine Punching machine
The GFP D1 perforating machine is designed to perform punching and carving in leather, similar leather, synthetic materials, etc.
With the machine, you can make holes not only round, but also of various shapes, such as squares, rectangles, diamonds, stars, etc.
Die replacement and adjustment is simple and quick, and the waste is sucked into a bag or bin
The work is continuous on the transport paper
Working area: 500mm
The set includes 7 matrices (patterns)
Year of production 2013
Complete documentation of the machine is attached to the machine
The machine has a CE declaration
The machine is in perfect technical condition
Video from the work of this model: https://www.youtube.com/watch?v=9qsTykaTUUg&t=1s