Computerised thermocementing and folding machine with photocells and microprocessors. It is able to fit the requirements of any single operator since this machine is able to self store commands while making the first piece of work and then repeat these ones accurately leaving to the operator only the task to guide the piece of work. The RP NOVA V4 controls the glue flow very accurately and delivers it inside the folding, in thread shape. At the end of each working cycle, the machine stops with the hammer in an open position and sets in the automatic glue suction, preventing the glue from falling down on the upper and consequently stain it.

Thermocementing and folding machine for Insole covering complete with table and clutch motor. RP 68 TE is equiped with a foot holder adjust able in heigh and a foot that can run into its own housing so that to process easily, with some further optional parts, the anatomic insoles as well.

Video: https://www.youtube.com/watch?v=b2yfcTgiJrQ&t=11s

Original Italian construction

Press force: 21T

Table dimensions: 1050mm x 500mm

Hammer dimensions: 500mm

Electronic setting of cutting depth and hammer return

The machine is in perfect technical condition

Machine operation video: https://www.youtube.com/watch?v=6IPb6VNsHWY

Colli BS 3

Seam maker with a heated arm

The machine is in very good condition

Kaev C105

Press force: 18T

Table dimensions: 930mm x 460mm

Hammer dimensions: 450mm

Simple intuitive operation

The machine is in perfect technical condition

A video of a similar machine in operation: https://www.youtube.com/watch?v=7nbNwLFsxgs

Kaev G 008 XL hydraulic cutter "mini" - tiny, compact

Pressing force 8 tons

Table dimensions: 700mm x 350mm

Hammer dimensions: 350mm

Max stroke 50mm

Maximum clearance between the table and the hammer: 130mm

Engine power 0.75kW

Weight approx. 400 kg

Approximate overall dimensions of the machine: 700mm x 700mm x 1700mm

Two-handed control for safe work

Simple intuitive operation

Full manufacturer's documentation + declaration of conformity for the machine

Machine operation video: https://www.youtube.com/watch?v=nSXRSxVdvQs

The machine is in perfect factory condition

GFP 500 D1 Perforating machine Punching machine

The GFP D1 perforating machine is designed to perform punching and carving in leather, similar leather, synthetic materials, etc.

With the machine, you can make holes not only round, but also of various shapes, such as squares, rectangles, diamonds, stars, etc.

Die replacement and adjustment is simple and quick, and the waste is sucked into a bag or bin

The work is continuous on the transport paper

Working area: 500mm

The set includes 7 matrices (patterns)

Year of production 2013

Complete documentation of the machine is attached to the machine

The machine has a CE declaration

The machine is in perfect technical condition

Video from the work of this model: https://www.youtube.com/watch?v=9qsTykaTUUg&t=1s

Equipped with a clutch

Fan

Own waste bin

The machine is in very good condition after replacing all bearings, new knife, new sharpener

GALLI TCE 3000 / 2T

Leather belt making machine

Features:

- cutting the beginning and the end of the strip

- punching

Adjusting the impact force, adjusting the width of the belt and the spacing (length of the belt)

We have a lot of accessories for work (one selected set included with the machine)

A short video of this model working: https://www.youtube.com/watch?v=QoaBmgSJ5Aw

The machine is in very good technical condition

Pfaff 3811

Sewing machine with the function of gathering material for strobe sewing

The machine is in very good technical condition

Durkopp Adler 367

Triple transport (needle - tooth - foot)

Large hook

Thread trimming

Manual reverse

Programmable initial and final locking

Maximum stitch 8mm

Presser foot lift adjustment

230V motor

Video of the machine in operation: https://www.youtube.com/watch?v=tz2KjhWRSss&t=1s

The machine is in perfect technical condition