Computerised thermocementing and folding machine with photocells and microprocessors. It is able to fit the requirements of any single operator since this machine is able to self store commands while making the first piece of work and then repeat these ones accurately leaving to the operator only the task to guide the piece of work. The RP NOVA V4 controls the glue flow very accurately and delivers it inside the folding, in thread shape. At the end of each working cycle, the machine stops with the hammer in an open position and sets in the automatic glue suction, preventing the glue from falling down on the upper and consequently stain it.

Suteau Anver XPM CE - hydraulic press, cutting machine, die for cutting various types of soft or medium-hard materials such as: foam, sponge, rubber, felt, leather, cardboard, etc.

Solid French production

Pressure force: 100 Tons

Working area: 1600mm x 800mm

Max stroke: 120mm

Max clearance between hammer and table: 150mm

Weight: approx. 6400kg

Full manufacturer's documentation for the machine

Video of this model working: https://www.youtube.com/watch?v=OGHbkYg5YAE

Machine in very good technical condition after full service

Thermocementing and folding machine for Insole covering complete with table and clutch motor. RP 68 TE is equiped with a foot holder adjust able in heigh and a foot that can run into its own housing so that to process easily, with some further optional parts, the anatomic insoles as well.

Video: https://www.youtube.com/watch?v=b2yfcTgiJrQ&t=11s

Electronic Cutting Machine USM SB - 25

Pressure 25 Ton

Hammer width: 380mm

Table dimensions: 900mm x 450mm

Hammer stroke: 7mm - 150mm

Maximum clearance between hammer and table: 180mm

Power: 2.4kW

Machine equipped with:

- reading point "0"

- pressure force adjustment

- hammer height adjustment after cutting

Machine after general technical service, ready to work

Video of this model in operation: https://www.youtube.com/watch?v=mA2eM26aQyA

Colli BS 3

Seam maker with a heated arm

The machine is in very good condition

Hydraulic Cutting Machine Atom G999 SAB

Pressure: 25T

Table dimensions: 1000mm x 500mm

Hammer dimensions: 500mm

Max stroke: 80mm

Hammer approach to the die using a joystick

Two-handed operation guaranteeing work safety

Machine dimensions:

-width 177cm

-depth 136cm

-height 150cm

Machine in very good technical condition after full service

Video of this model in operation:

https://www.youtube.com/watch?v=fk2175ANarM

MINI ATOM SE 8 Hydraulic Cutting Machine

8Ton Pressing Force

Table Dimensions: 600mm x 300mm

Hammer Dimensions: 300mm

Max Stroke 90mm

Engine Power 0.9kW

Weight 430kg

Overall Machine Dimensions: 600mm x 690mm x 1330mm

Two-handed control guaranteeing work safety

Simple, intuitive operation

Machine in very good technical condition

Video of this model in operation https://www.youtube.com/watch?v=y8OHhTnTOMk

MINI ATOM SE 8 Hydraulic Cutting Machine

8Ton Pressing Force

Table Dimensions: 600mm x 300mm

Hammer Dimensions: 300mm

Max Stroke 90mm

Motor Power 0.9kW

Weight 430kg

Power Supply 230V

Overall Dimensions of the Machine: 600mm x 690mm x 1330mm

Two-Handed Control Guaranteeing Work Safety

Simple Intuitive Operation

Machine in Very Good Technical Condition

Video of the Operation of This Model https://www.youtube.com/watch?v=y8OHhTnTOMk

Pfaff 3811

Sewing machine with the function of gathering material for strobe sewing

The machine is in very good technical condition

Durkopp Adler 367

Triple transport (needle - tooth - foot)

Large hook

Thread trimming

Manual reverse

Programmable initial and final locking

Maximum stitch 8mm

Presser foot lift adjustment

230V motor

Video of the machine in operation: https://www.youtube.com/watch?v=tz2KjhWRSss&t=1s

The machine is in perfect technical condition

Kaev C106.7 Hydraulic Cutting Machine

Pressure 20Ton

Table dimensions: 1000mm x 500mm

Hammer dimensions: 350mm

Max stroke 100mm

Motor power 1.5kW

Weight 800kg

Power supply 380V

Overall dimensions of the machine: 1100mm x 1260mm x 1700mm

Two-handed control guaranteeing work safety

Simple intuitive operation

Machine in very good technical condition

Video of the machine operation: https://www.youtube.com/watch?v=6aZrJk8fSXA