MINI ATOM SE 8 hydraulic cutting machine
Pressing force 8Ton
Table dimensions: 600mm x 300mm
Hammer dimensions: 300mm
Max stroke 90mm
Engine power 0.9kW
Weight 430 kg
Total dimensions of the machine: 600mm x 690mm x 1330mm
Two-handed control guarantees safe operation
Simple, intuitive operation
The machine is in perfect technical condition
Video of the machine working: https://www.youtube.com/watch?v=y8OHhTnTOMk
Kyotex is an innovative and environmentally friendly adhesive system used by major Italian and European footwear and purse makers for a wide range of applications, in particular for the attachment of a shoe insole.
It is based on a combination of an innovative, high-performance self-adhesive film.
Full manufacturer's documentation for the machine
Video from the operation of the machine: https://www.youtube.com/watch?v=A1Sx2LZ_3ik
The machine is in perfect technical condition
Atom HS588 / 3 CE Bridge Cutting Machine
Pressure 25 Ton
Table dimensions: 1600mm x 500mm
Hammer dimensions: 500mm x 500mm
Maximum hammer stroke: 150mm
Motor power 1.5kW
Simple, intuitive operation using a PLC touch panel
Machine like NEW, in perfect technical condition
Full manufacturer's documentation for the machine
Video of this model in operation: https://www.youtube.com/watch?v=dyPW67lLAyc&t=12s
Garudan GC - 330 - 543 H / L40 heavy sewing machine (Equivalent to Durkopp Adler 205 - 370)
- one needle machine
- triple foot-tooth transport with a moving needle
- stitch length up to 11mm
- arm 40 cm long and 8 mm in diameter
- machine equipped with a pneumatic reverse
- needle positioning
- 380V engine
A short video from the work of such a model: https://www.youtube.com/watch?v=S_N-eGTY4Hw
The machine is in very good condition
ATOM S 125C Hydraulic Cutting Machine
3 cutting programs without each adjustment when changing the knife length
Pressure force 25Ton
Table dimensions: 900mm x 450mm
Hammer dimensions: 500mm
Max stroke 90mm
Engine power 0.9kW
Weight 1030kg
Total dimensions of the machine: 1000mm x 1030mm x 1430mm
Two-handed control guaranteeing work safety
Simple intuitive operation
Machine in perfect technical condition
Video of the machine operation: https://www.youtube.com/watch?v=UAsUsWrbh7Y
Folding Machine
Video: https://www.youtube.com/watch?v=jU3m1rAIOVc&t=1s
Upper thermocementing and folding machine, photocells controlled, complete with table and clutch motor.
Automatic controls by photocells:
– cement fow and adjustable delay
– feeding for external curves with progammable delay according to the speed
– feeding for internal curves with progammable delay according to the speed and automatic cutting with adjustable step
– easy selection of photosensor according to the geometry of the working leather uppers.
ATOM S125 CE Hydraulic Cutting Machine
Pressure 25Ton
3 cutting programs without adjustment each time when changing the knife length
Table dimensions: 1000mm x 500mm
Hammer dimensions: 500mm
Max stroke 90mm
Engine power 0.9kW
Weight about 1030kg
Total dimensions of the machine: 1000mm x 1030mm x 1430mm
Very fast and powerful
Two-handed control guaranteeing work safety
Simple intuitive operation
Machine in perfect technical condition after service
Video of this model in operation: https://www.youtube.com/watch?v=P93GrX-KdWg
Computerised thermocementing and folding machine with photocells and microprocessors. It is able to fit the requirements of any single operator since this machine is able to self store commands while making the first piece of work and then repeat these ones accurately leaving to the operator only the task to guide the piece of work. The RP NOVA V4 controls the glue flow very accurately and delivers it inside the folding, in thread shape. At the end of each working cycle, the machine stops with the hammer in an open position and sets in the automatic glue suction, preventing the glue from falling down on the upper and consequently stain it.
ATOM SE22 CE Hydraulic Cutting Machine
Pressure 22 Tons
Table dimensions: 1200mm x 500mm
Hammer dimensions: 500mm
Max stroke 90mm
Engine power 0.9kW
Weight about 1060kg
Total dimensions of the machine: 1200mm x 1030mm x 1430mm
Very fast and powerful
Two-handed control guaranteeing work safety
Simple intuitive operation
Machine in perfect technical condition after service
Video of a similar machine in operation: https://www.youtube.com/watch?v=P93GrX-KdWg
Thermocementing and folding machine for Insole covering complete with table and clutch motor. RP 68 TE is equiped with a foot holder adjust able in heigh and a foot that can run into its own housing so that to process easily, with some further optional parts, the anatomic insoles as well.
Video: https://www.youtube.com/watch?v=b2yfcTgiJrQ&t=11s
ATOM S325 Hydraulic Cutting Machine
Pressure 25 Ton
Working area 1600mm x 500mm
Max stroke 350mm
Maximum clearance between hammer and table 400mm
Engine power 5.5kW
Weight 2500kg
Overall dimensions of the machine 2020x840x1930
Very fast and powerful
Two-handed control guaranteeing work safety
Simple intuitive operation
Machine in very good technical condition
Video of the operation of such a model: https://www.youtube.com/watch?v=KKOtVSV3gtQ&t=60s
Colli BS 3
Seam maker with a heated arm
The machine is in very good condition
