Fortuna 50 PUAG edge thinner - original German product
A machine used in the leather industry for thinning the edges of materials such as leather, synthetics, leather-like materials, textiles, etc.
Equipment and functions:
- clutch motor for speed regulation
- thickness, width and working angle adjustment
- a machine equipped with a fan and a waste basket
Machine in very good condition ready to work
Working area: 400mm
Machine with knife position display
Digital display of the thickness of the divided material
Smooth regulation of material feeding speed
Equipped with waste bin and dust fan
The machine is in PERFECT technical condition
Pffaff 1295
- triple foot transport
- large hook
- stitch length up to 6mm
- manual reverse
- needle positioning
- 230V motor
The machine is in very good technical condition
FENIX BDF 804 bottoms and uppers activator
Original Italian product
Machine used in the process of gluing shoe soles to activate the glue - heats the sole of the shoe and the lower part of the shoe
Year of manufacture: 2017
The machine is in perfect technical condition after full service ready to work
Strobel 141 - 23EV
With this machine, the insoles are sewn to the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the insertion operation.
Stitch type: single thread, overcast
Stitch length: 3 - 8 mm adjustable
Needle system: 134
230V energy-saving motor
The machine is in very good technical condition
Strobel 141 - 23EV
With this machine, the insoles are sewn to the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the insertion operation.
Stitch type: single thread, overcast
Stitch length: 3 - 8 mm adjustable
Needle system: 134
380V Efka motor
The machine is in very good technical condition
Durkopp Adler 269
Arm machine
1 - needle
- triple foot transport
- large hook
- manual reverse
- power supply 380V
The machine is in very good technical condition
Fortuna UAF 470 surface splitting machine - leather splitting machine
Working area: 47cm
It has an automatic knife access
Three material feeding speeds
Feeding material on two rollers
The machine is in very good technical condition after a general service
Atom Bridge Cutting Machine HS588/10 hydraulic press
Pressure 30 Tons
Simple, intuitive operation with the function of automatic departure after cutting
Table dimensions: 2000mm x 750mm
Hammer dimensions: 750mm x 750mm
Maximum hammer stroke: 150mm
Maximum clearance between hammer and table: 188mm
Motor power: 1.87kW
Weight: 2270kg
Full dimensions of the machine: 2380mm x 1660mm x 2300mm
The machine is in perfect technical condition after full service
Video of the machine in operation: https://www.youtube.com/watch?v=3DUrnwg86mI
Ormac 833 T - programmable computer hydraulic tip stud puncher
- electro-hydraulic programmable machine
- the machine has 9 towing jaws
- equipped with glue markers
The machine is equipped with a system that allows the assembly of any type of shoe in any size at no extra cost. All times, adjustments and machine functions are easily programmed via the touchscreen, reducing start and changeover times. Up to 100 programs can be stored.
Year of manufacture: 2015
The machine is in perfect technical condition, like new!
Video of the machine in operation: https://www.youtube.com/watch?v=GSpu80-QNa8
Durkopp Adler 888 Classic
Triple roller transport
Large hook
Thread cutting
Manual reverse
Programmable initial and final locking
Bottom material cutter
230V engine
The machine is in perfect technical condition
