Forming machine vamps Giovi Sabal 4700 / SA

Hydraulic-pneumatic machine

Long, double-broken sword

Heated sword and side thrusts

The machine is in perfect technical condition

- shoe load sensor

- security barriers

- double air blow

- automatic / manual operation

Computerised thermocementing and folding machine with photocells and microprocessors. It is able to fit the requirements of any single operator since this machine is able to self store commands while making the first piece of work and then repeat these ones accurately leaving to the operator only the task to guide the piece of work. The RP NOVA V4 controls the glue flow very accurately and delivers it inside the folding, in thread shape. At the end of each working cycle, the machine stops with the hammer in an open position and sets in the automatic glue suction, preventing the glue from falling down on the upper and consequently stain it.

Triple transport

Large hook

Pneumatic presser foot lifting

Foot transport

Large hook

Pneumatic presser foot lifting

Needle positioning

The machine is in perfect condition! Year of production 2017!

Thermocementing and folding machine for Insole covering complete with table and clutch motor. RP 68 TE is equiped with a foot holder adjust able in heigh and a foot that can run into its own housing so that to process easily, with some further optional parts, the anatomic insoles as well.

Video: https://www.youtube.com/watch?v=b2yfcTgiJrQ&t=11s

2 - needle machine with 10mm spacing

Foot transport

Large hooks

Thread trimming

Initial and final locking

The machine is in perfect condition

Colli BS 3

Seam maker with a heated arm

The machine is in very good condition

Strobel 141 - 23 EV

This machine sews insoles with an uppers with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles in leather and textile shoes with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the feeding operation.

Stitch type: single-thread, overcasting

Stitch length: 3 - 8 mm adjustable

Needle system: 134

The machine is in very good condition

GFP 500 D1 Perforating machine Punching machine

The GFP D1 perforating machine is designed to perform punching and carving in leather, similar leather, synthetic materials, etc.

With the machine, you can make holes not only round, but also of various shapes, such as squares, rectangles, diamonds, stars, etc.

Die replacement and adjustment is simple and quick, and the waste is sucked into a bag or bin

The work is continuous on the transport paper

Working area: 500mm

The set includes 7 matrices (patterns)

Year of production 2013

Complete documentation of the machine is attached to the machine

The machine has a CE declaration

The machine is in perfect technical condition

Video from the work of this model: https://www.youtube.com/watch?v=9qsTykaTUUg&t=1s

GALLI TCE 3000 / 2T

Leather belt making machine

Features:

- cutting the beginning and the end of the strip

- punching

Adjusting the impact force, adjusting the width of the belt and the spacing (length of the belt)

We have a lot of accessories for work (one selected set included with the machine)

A short video of this model working: https://www.youtube.com/watch?v=QoaBmgSJ5Aw

The machine is in very good technical condition