SIMAC sewing machine with high post (Pfaff, Durkopp Adler equivalent)

Machine equipped with:

- triple roller transport

- needle positioning

The machine is in perfect technical condition

SPS 120 - E - 10

Hook insertion machine - hooker

Two-channel machine for automatic feeding of rivets and buttonhole hooks. Particularly suitable for use on sports or military shoes and boots, it has a pneumatic action.

The lace holder is loaded automatically by the vibrator, which places it on the appropriate falling guide until it is placed on the die, the rivet is fed through the falling channel. When you press the pedal, both parts are attached to the material.

A sample of the work performed is visible in the photos

Video of this model in operation: https://www.youtube.com/watch?v=Z3-HYlwsE0Q

The machine is in very good technical condition

Atom SP588 bridge cutter / 3 hydraulic press

Simple, intuitive operation with automatic departure function after cutting

Pressure 25Ton

Table dimensions: 1600mm x 500mm

Hammer dimensions: 500mm x 500mm

Maximum hammer stroke: 100mm

Maximum clearance between hammer and table: 143mm

Installed power: 1.5kW

Weight: 1430kg

Full machine dimensions: 1960mm x 1460mm x 2010mm

Full manufacturer's documentation for the machine

The machine is in perfect technical condition after full service

Video of this model in operation: https://www.youtube.com/watch?v=w4_1IARCw5U

Strobel 410 - 1 EV

This machine sews insoles with an uppers with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles of leather and textile shoes. The shirring device facilitates the feeding operation.

Stitch type: single-thread, overcasting

Stitch length: 3 - 8 mm adjustable

The machine is in very good condition

ATOM VS 922 hydraulic cutting machine

Pressing force 20Ton

2 cutting programs without each adjustment when changing the knife length

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.9kW

Weight approximately 700 kg

Total dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-handed control guarantees safe operation

Simple, intuitive operation

The machine is in perfect technical condition after service

Video of the machine working: https://www.youtube.com/watch?v=t8RpxusXiI4

Galli EGM

A machine for the production of a leather belt - a machine used to close belt loops using a decorative staple

A manual machine

The machine is efficient - ready to work

Mark MKH1 - DH

Hook insertion machine - hooker

Three-channel machine for automatic feeding of rivets, hooks and washers. Particularly suitable for use on footwear and sports or military shoes, has a pneumatic action.

Sample of work performed visible in the photos

Short film of the machine operation: https://www.youtube.com/watch?v=vZFPImAE0bY

Machine in very good technical condition

Shoe warmer with a pair of Elettrotecnica 271PS

The machine is equipped with temperature and steam control

The machine is in very good condition

ATOM VS 918 hydraulic cutting machine

Pressing force 20 Tons

2 cutting programs without any adjustment when changing the length of the knife

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.9 kW

Weight about 700 kg

Overall dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-hand control for work safety

Simple intuitive operation

The machine is in perfect technical condition after service

Video of the work of a similar machine: https://www.youtube.com/watch?v=P93GrX-KdWg

Mechanical riveter - SIAC riveting machine

Original Italian product

Machine set for rivets with a head diameter of 7mm

Machine equipped with:

automatic rivet feeder

counter of completed cycles

230V power supply

Video of the machine working: https://www.youtube.com/shorts/q2ag5Adub2A

Machine in very good technical condition, ready to work

Press force: 22T

Hammer width: 550mm

Table dimensions: 920mm x 470mm

The machine is in very good condition after full service

ATOM S118 hydraulic cutting machine

Pressing force 18 tons

3 cutting programs without each adjustment when changing the knife length

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.75kW

Weight approximately 890 kg

Total dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-handed control guarantees safe operation

Simple, intuitive operation

The machine is in perfect technical condition after service

Video of a similar machine working: https://www.youtube.com/watch?v=P93GrX-KdWg