Durkopp Adler 4280
Automatic 2-needle machine
Triple roller transport
Large hook
Thread cutting
Manual reverse
Programmable initial and final locking
230V engine
The machine is in very good condition
Working area: 40cm
It has an automatic knife approach
Two material feeding speeds
Material feeding: roller - roller
Split thickness digital display
Equipped with the possibility of automatic material retraction
Machine operation video: https://www.youtube.com/watch?v=836Kun5l1Y0
The machine is in PERFECT technical condition
20Ton pressure
Table dimensions: 900mm x 430mm
Hammer dimensions: 380mm
Max stroke 90mm
Very fast and strong
Two-hand control that guarantees safety at work
Simple intuitive operation
The machine is in perfect condition after service
Skiving machine for skiving steep edges between 0° - 45°.
The maximum working width is 11 mm.
Mainly used in the shoe industry, not suitable for shoe uppers.
The 34 S-AG/M was especially developed for skiving steep edges. The skiving angle is stepless setable by quick adjustment. With the overhead feed motor and re-adjustable feed cone an exact automatic work piece guidance is achieved. To ensure an optimal cut the feed speed is stepless adjustable.
Equipped with a fan and its own waste bin
The machine is in very good condition, ready for operation after full service (new knife, sharpener, new bearings, new feeder)
Electronic clicker press USM SB - 25
Pressure of 25 tons
Hammer width: 380mm
Table dimensions: 900mm x 450mm
Hammer travel: 7mm - 150mm
Maximum clearance between the hammer and the table: 180mm
Power: 2.4kW
Very precise electronic adjustment of the cutting force and the hammer return
The machine has been completely renovated - new electronics
Machine operation video: https://www.youtube.com/watch?v=7YQ8KQE6OtI
Clicker press USM SB - 25
Pressure of 25 tons
Hammer width: 380mm
Table dimensions: 900mm x 450mm
Hammer travel: 7mm - 150mm
Maximum clearance between the hammer and the table: 180mm
Power: 2.4kW
Very precise electronic adjustment of the cutting force and the hammer return
The machine is equipped with a cycle counter
The machine is 100% operational, ready to work after full technical maintenance
A video of the work of such a model: https://www.youtube.com/watch?v=mA2eM26aQyA&t=9s
Strobel 141 - 23EV
With this machine, the insoles are sewn to the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm.
Stitch type: single thread, overcast
Stitch length: 3 - 8 mm adjustable
Needle system: 134
Energy-saving 230V motor with needle positioner
The machine is in very good technical condition
Pfaff 8302
Fusing machine for sealing seams
Hot air seam sealing machine is used to seal seams with tapes.
It is mainly used for the production of footwear, clothing, jackets, coveralls and wherever waterproofing of outer garments is required.
Equipment and advantages:
- specially inclined arm to facilitate the insertion of material
- comfortable and large work table
- cutting the tape
The machine is in very good condition
SVIT 54260 dust bag extraction
Engine power 2.2 kW
Perfect for connecting to brushing machines, polishers, milling machines and grinders.
It works great in many industries
Powerful and efficient
The machine is in very good condition
Skiving machine FAV AV2 MSAE - original Italian product
Machine used in the leather industry for thinning the edges of materials such as leather, synthetic materials, leather-like, textiles, etc.
Equipment and functions:
- electronic motor to regulate the speed of work
- thickness, width and angle adjustment
- possibility of continuous operation (built-in rotation speed inverter) or regulated operation from the foot pedal
- machine equipped with a fan and a waste basket
The machine is ready to work in very good condition
Year of production 2017
Hydraulic cutting machine Svit 06145 P2
Press force: 20T
Table dimensions: 940mm x 480mm
Hammer dimensions: 360mm
Max stroke: 60mm
The hammer rides the die with the joystick
Two-handed operation guaranteeing work safety
Machine dimensions:
-width 940mm
-depth 1040mm
- height 1428mm
Full manufacturer's documentation for the machine
The machine is in very good condition after full service
Video from the work of this model:
https://www.youtube.com/watch?v=vxVvR7A2ZEo
