Screw compressor ALUP SCK 20-10

Technical data:

Power: 15kW

Capacity: 2.12 m3 / min

Pressure: 10 bar

Supply voltage: 400V / 50 Hz

freestanding compressor

Compressor in very good condition

Strobel 141 - 23EV

With this machine, the insoles are sewn to the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the insertion operation.

Stitch type: single thread, overcast

Stitch length: 3 - 8 mm adjustable

Needle system: 134

The machine is in very good technical condition

Strobel 141 - 23EV

With this machine, the insoles are sewn to the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the insertion operation.

Stitch type: single thread, overcast

Stitch length: 3 - 8 mm adjustable

Needle system: 134

Energy-saving 230V motor + needle positioning

The machine is in very good technical condition

Durkopp Adler 221

Long arm machine (760mm length from the body to the needle)

- triple foot transport

- very large hook (37mm)

- full automatic

- thread cutting

- needle positioning

- programmable start and end locking

All functions are adjustable from the operator panel

The machine is in very good condition

We have 2 pieces of such machines

Fortuna UA 305 surface splitting machine - leather splitting machine

Working area: 30cm

The machine is equipped with:

- adjustment of the thickness of the material division

- two speeds of material feeding

- dust extractor and waste basket

Full manufacturer's documentation for the machine

Machine in very good condition after service

Kaev G1650A hydraulic bridge cutter

Pressing force 25 Tons

Table dimensions: 1600mm x 500mm

Hammer dimensions: 500mm x 500mm

Weight 1400kg

Very fast and powerful

Two-hand control for work safety

Simple, intuitive operation with the function of automatic departure after cutting

Video: https://www.youtube.com/watch?v=ZJa1s5Fx3r4

The machine is in perfect technical condition after service

DURKOPP ADLER 867 - 190322 - M GOLD

- Triple foot and tooth transport

- Large hook (26mm bobbin)

- Cutting the thread

- Programmable initial and final locking

- Speed reduction system with increased stepping height

- Maximum thread thickness 10/3Nm

- Maximum stitch length up to 12mm (Two separate adjustments that can be switched at any time)

- Foot lifting height up to 20mm

- Adjustable feet stroke up to 9mm

- Needle bar arm length 335mm

- Maximum number of stitches per minute 3800

- 230V motor

- Compressed air is needed to operate the machine

Video of the machine in operation: https://www.youtube.com/watch?v=OfwZwB9yQrA&t=3s

The machine is in perfect technical condition, like new!

Atom GL 26 CE

Multi-knife strapping machine for cutting leather into strips

Working field width: 500mm

Year of manufacture: 2005

kW motor: 1.9

Cutting speed adjustable by foot pedal or constant speed adjustable by potentiometer

Full manufacturer's documentation for the machine

The machine is in perfect technical condition, like new