ATOM SE 20C CE hydraulic cutter

Press force of 20 tons

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.9kW

Weight 630 kg

Overall dimensions of the machine: 900mm x 900mm x 1400mm

Very fast and strong

Two-handed control for safe work

Simple intuitive operation

Year of production: 2016

Machine operation video: https://www.youtube.com/watch?v=bQTxTSeNZUA

The machine is in perfect condition after the service

Durkopp Adler 267

A high 40cm post - a 1-needle machine

- triple transport

- needle positioning

- manual reverse

Suitable for sewing bags, cases, briefcases, shoes.

The machine is in very good condition

Svit 06 160 P3

Electro - hydraulic bridge cutting press / hydraulic cutter

Pressure 40 tons

Working area: 1600mm x 600mm

The machine is 100% operational, ready to work after full technical maintenance

Full manufacturer's documentation for the machine

Video from the work of such a model:

https://www.youtube.com/watch?v=STT5X-aHmdk

Durkopp Adler 4280

Automatic 2-needle machine

Triple roller transport

Large hook

Thread cutting

Manual reverse

Programmable initial and final locking

230V engine

The machine is in very good condition

Working area: 40cm

It has an automatic knife approach

Two material feeding speeds

Material feeding: roller - roller

Split thickness digital display

Equipped with the possibility of automatic material retraction

Machine operation video: https://www.youtube.com/watch?v=836Kun5l1Y0

The machine is in PERFECT technical condition

20Ton pressure

Table dimensions: 900mm x 430mm

Hammer dimensions: 380mm

Max stroke 90mm

Very fast and strong

Two-hand control that guarantees safety at work

Simple intuitive operation

The machine is in perfect condition after service

Skiving machine for skiving steep edges between 0° - 45°.
The maximum working width is 11 mm.
Mainly used in the shoe industry, not suitable for shoe uppers.
The 34 S-AG/M was especially developed for skiving steep edges. The skiving angle is stepless setable by quick adjustment. With the overhead feed motor and re-adjustable feed cone an exact automatic work piece guidance is achieved. To ensure an optimal cut the feed speed is stepless adjustable.

Equipped with a fan and its own waste bin

The machine is in very good condition, ready for operation after full service (new knife, sharpener, new bearings, new feeder)

Electronic clicker press USM SB - 25

Pressure of 25 tons

Hammer width: 380mm

Table dimensions: 900mm x 450mm

Hammer travel: 7mm - 150mm

Maximum clearance between the hammer and the table: 180mm

Power: 2.4kW

Very precise electronic adjustment of the cutting force and the hammer return

The machine has been completely renovated - new electronics

Machine operation video: https://www.youtube.com/watch?v=7YQ8KQE6OtI

Clicker press USM SB - 25

Pressure of 25 tons

Hammer width: 380mm

Table dimensions: 900mm x 450mm

Hammer travel: 7mm - 150mm

Maximum clearance between the hammer and the table: 180mm

Power: 2.4kW

Very precise electronic adjustment of the cutting force and the hammer return

The machine is equipped with a cycle counter

The machine is 100% operational, ready to work after full technical maintenance

A video of the work of such a model: https://www.youtube.com/watch?v=mA2eM26aQyA&t=9s

Strobel 141 - 23EV

With this machine, the insoles are sewn to the upper with a strong overcast stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm.

Stitch type: single thread, overcast

Stitch length: 3 - 8 mm adjustable

Needle system: 134

Energy-saving 230V motor with needle positioner

The machine is in very good technical condition

Pfaff 8302

Fusing machine for sealing seams

Hot air seam sealing machine is used to seal seams with tapes.

It is mainly used for the production of footwear, clothing, jackets, coveralls and wherever waterproofing of outer garments is required.

Equipment and advantages:

- specially inclined arm to facilitate the insertion of material

- comfortable and large work table

- cutting the tape

The machine is in very good condition