Hydraulic cutting machine Svit 06145 P2

Press force: 18T

Table dimensions: 940mm x 480mm

Hammer dimensions: 360mm

The hammer rides the die with the joystick

Two-handed operation guaranteeing work safety

The machine is in very good condition after the review

Movie from the operation of the machine:

https://www.youtube.com/watch?v=vxVvR7A2ZEo

Ares E22G CE Green Power

Electric cutting press with front/rear moving table

The most technologically advanced model available on the market

– fully electric without oil seals, pump, motor, flywheel, etc

– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance

– ecological production system that respects the environment and is characterized by low CO2 emissions

-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter

– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase

Strobel 141 - 23 EV

This machine sews insoles with an uppers with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles in leather and textile shoes with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the feeding operation.

Stitch type: single-thread, overcasting

Stitch length: 3 - 8 mm adjustable

Needle system: 134

The machine is in very good condition

Ares E23G Green Power

Electric cutting press with a swinging head

The most technologically advanced model available on the market

– fully electric without oil seals, pump, motor, flywheel, etc

– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance

– ecological production system that respects the environment and is characterized by low CO2 emissions

-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter

– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase

Strobel 141 - 23 EV

This machine sews insoles with an uppers with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles in leather and textile shoes with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the feeding operation.

Stitch type: single-thread, overcasting

Stitch length: 3 - 8 mm adjustable

Needle system: 134

The machine is in very good condition

OMAC 995 F

Tape cutting machine

Perfect for cutting Velcro, fabric, rubber, paper and reflective tape

The machine is equipped with a control panel where we can adjust:

- length of the cut material

- regulation of the number of cut elements

- cutting speed adjustment

The machine is in perfect technical condition

Video of the machine working: https://www.youtube.com/watch?v=3pUhxFswg5c

Press force: 22T

Table dimensions: 900mm x 450mm

Hammer dimensions: 500mm

Max stroke: 150mm

The machine is in perfect technical condition

ATOM VS 918 hydraulic cutting machine

Pressing force 20 Tons

2 cutting programs without any adjustment when changing the length of the knife

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.9 kW

Weight about 700 kg

Overall dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-hand control for work safety

Simple intuitive operation

The machine is in perfect technical condition after service

Video of the work of a similar machine: https://www.youtube.com/watch?v=P93GrX-KdWg

The machine with the possibility of clutch operation or smooth speed regulation

Equipped with a fan and its own waste bin

The machine is in very good condition after replacing all bearings, new knife, new sharpener

ATOM S118 hydraulic cutting machine

Pressing force 18 tons

3 cutting programs without each adjustment when changing the knife length

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.75kW

Weight approximately 890 kg

Total dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-handed control guarantees safe operation

Simple, intuitive operation

The machine is in perfect technical condition after service

Video of a similar machine working: https://www.youtube.com/watch?v=P93GrX-KdWg