Ares E23G Green Power

Electric cutting press with a swinging head

The most technologically advanced model available on the market

– fully electric without oil seals, pump, motor, flywheel, etc

– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance

– ecological production system that respects the environment and is characterized by low CO2 emissions

-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter

– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase

OMAC 995 F

Tape cutting machine

Perfect for cutting Velcro, fabric, rubber, paper and reflective tape

The machine is equipped with a control panel where we can adjust:

- length of the cut material

- regulation of the number of cut elements

- cutting speed adjustment

The machine is in perfect technical condition

Video of the machine working: https://www.youtube.com/watch?v=3pUhxFswg5c

ATOM VS 918 hydraulic cutting machine

Pressing force 20 Tons

2 cutting programs without any adjustment when changing the length of the knife

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.9 kW

Weight about 700 kg

Overall dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-hand control for work safety

Simple intuitive operation

The machine is in perfect technical condition after service

Video of the work of a similar machine: https://www.youtube.com/watch?v=P93GrX-KdWg

Mark 1301 ST

Machine for applying hooks - hooker

Equipped with two hook and rivet feeders

A sample of the work performed is visible in the photos

The machine is in very good technical condition

SPS 120 - E - 10

Hook insertion machine - hooker

Two-channel machine for automatic feeding of rivets and buttonhole hooks. Particularly suitable for use on sports or military shoes and boots, it has a pneumatic action.

The lace holder is loaded automatically by the vibrator, which places it on the appropriate falling guide until it is placed on the die, the rivet is fed through the falling channel. When you press the pedal, both parts are attached to the material.

A sample of the work performed is visible in the photos

Video of this model in operation: https://www.youtube.com/watch?v=Z3-HYlwsE0Q

The machine is in very good technical condition

ATOM S118 hydraulic cutting machine

Pressing force 18 tons

3 cutting programs without each adjustment when changing the knife length

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.75kW

Weight approximately 890 kg

Total dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-handed control guarantees safe operation

Simple, intuitive operation

The machine is in perfect technical condition after service

Video of a similar machine working: https://www.youtube.com/watch?v=P93GrX-KdWg

Mark MKH1 - DH

Hook insertion machine - hooker

Three-channel machine for automatic feeding of rivets, hooks and washers. Particularly suitable for use on footwear and sports or military shoes, has a pneumatic action.

Sample of work performed visible in the photos

Short film of the machine operation: https://www.youtube.com/watch?v=vZFPImAE0bY

Machine in very good technical condition

ATOM SE 18 hydraulic cutting machine

Pressing force 18 tons

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Engine power 0.75kW

Weight approximately 890 kg

Total dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-handed control guarantees safe operation

Simple, intuitive operation

The machine is in perfect technical condition after service

Video of a similar machine working: https://www.youtube.com/watch?v=P93GrX-KdWg

Mechanical riveter - SIAC riveting machine

Original Italian product

Machine set for rivets with a head diameter of 7mm

Machine equipped with:

automatic rivet feeder

counter of completed cycles

230V power supply

Video of the machine working: https://www.youtube.com/shorts/q2ag5Adub2A

Machine in very good technical condition, ready to work

ATOM S120 hydraulic cutting machine

Pressing force 20 tons

3 cutting programs without each adjustment when changing the knife length

Table dimensions: 900mm x 430mm

Hammer dimensions: 370mm

Max stroke 90mm

Motor power 1.1kW

Weight approximately 890 kg

Total dimensions of the machine: 900mm x 900mm x 1430mm

Very fast and powerful

Two-handed control guarantees safe operation

Simple, intuitive operation

The machine is in perfect technical condition after service

Video of a similar machine working: https://www.youtube.com/watch?v=P93GrX-KdWg