Muller & Kurth RT05 300

A machine for cutting leather and soft and medium-hard materials into strips, a multi-blade stripper

Original German product

The machine is equipped with 6 rollers that allow you to develop 6 different cutting widths for your needs, smoothly shifting the roller that is needed at a given moment.

Width of the working field: 300mm - the left side of the working field is open, thanks to which the cut material can be wider than the width of the working field.

The machine is in very good technical condition

Hydraulic cutting machine Svit 06145 P2

Press force: 18T

Table dimensions: 940mm x 480mm

Hammer dimensions: 360mm

The hammer rides the die with the joystick

Two-handed operation guaranteeing work safety

The machine is in very good condition after the review

Movie from the operation of the machine:

https://www.youtube.com/watch?v=vxVvR7A2ZEo

Strobel 141 - 23 EV

This machine sews insoles with an uppers with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles in leather and textile shoes with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the feeding operation.

Stitch type: single-thread, overcasting

Stitch length: 3 - 8 mm adjustable

Needle system: 134

The machine is in very good condition

Kaev G1650A CE hydraulic bridge cutting machine

Pressing force 25 tons

Table dimensions: 1600mm x 500mm

Hammer dimensions: 500mm x 500mm

Weight 1400 kg

Very fast and powerful

Two-handed control guarantees safe operation

Simple, intuitive operation with automatic departure function after cutting

Full manufacturer's documentation for the machine

Video of this model in operation: https://www.youtube.com/watch?v=ZJa1s5Fx3r4

The machine is in perfect technical condition after service

Strobel 141 - 23 EV

This machine sews insoles with an uppers with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. On this machine, we can sew the insoles in leather and textile shoes with a total thickness of the sewn layer up to 7 mm. The shirring device facilitates the feeding operation.

Stitch type: single-thread, overcasting

Stitch length: 3 - 8 mm adjustable

Needle system: 134

The machine is in very good condition

Ares E22G CE Green Power

Electric cutting press with front/rear moving table

The most technologically advanced model available on the market

– fully electric without oil seals, pump, motor, flywheel, etc

– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance

– ecological production system that respects the environment and is characterized by low CO2 emissions

-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter

– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase

Ares E23G Green Power

Electric cutting press with a swinging head

The most technologically advanced model available on the market

– fully electric without oil seals, pump, motor, flywheel, etc

– shortened periodic maintenance facilitating after-sales service, remote control and remote assistance

– ecological production system that respects the environment and is characterized by low CO2 emissions

-completely innovative, with 75% less electricity consumption compared to a traditional hydraulic cutter

– sound emission in the working phase equal to 0 decibels and limited to only a fraction of a second in the cutting phase

Press force: 22T

Table dimensions: 900mm x 450mm

Hammer dimensions: 500mm

Max stroke: 150mm

The machine is in perfect technical condition

OMAC 995 F

Tape cutting machine

Perfect for cutting Velcro, fabric, rubber, paper and reflective tape

The machine is equipped with a control panel where we can adjust:

- length of the cut material

- regulation of the number of cut elements

- cutting speed adjustment

The machine is in perfect technical condition

Video of the machine working: https://www.youtube.com/watch?v=3pUhxFswg5c

The machine with the possibility of clutch operation or smooth speed regulation

Equipped with a fan and its own waste bin

The machine is in very good condition after replacing all bearings, new knife, new sharpener