SVIT 06144 P1 - leather splitting machine
Working area: 40cm
It has an automatic knife approach
Two speeds of feeding rollers
Feeding material on two rollers
The machine is in very good condition after the service
Machine operation video: https://www.youtube.com/watch?v=Ic_wjc5185Q
CMCI MB50 Falan FT70
Original Italian product
A sewing machine for moccasin-type shoes, significantly speeds up production compared to traditional hand sewing
Technical characteristics
Speed: 400 stitches/min
Stitch length: max. 8 mm
Threads: from 0.4 mm to max. 1.0 mm waxed
Needle system: 794
Motor: EFKA DC 1550 control - 220V 50/60 Hz
Motor power: 750 kW
Full manufacturer's documentation and CE declaration included
New machine! - only start-up tests performed on the machine
ATOM S6110 / 2 HT hydraulic cutting machine
The device is designed for exercising various materials.
Technical data:
Strong mask; 100 tons
Working pole: 1600 mm x 1050 mm
8kW engine
Hydraulic oil capacity: 200 liters
Production year: 1998
Durkopp Adler 467
Long arm machine
- triple foot transport
- large hook
- full automatic
- thread cutting
- needle positioning
- programmable start and end locking
All functions are adjustable from the operator panel
The machine is in very good condition
Video: https://www.youtube.com/watch?v=7Tmg6e70rCU
MEC VAL CS93 Sole Sewing Machine
Foot feed
Large looper
Pneumatic presser foot lift
Needle positioning
Machine in perfect technical condition after full service
The painting booth allows for the application of water-based paints with a hand-held spray gun.
The booth has:
- a water curtain
- its own dust extraction (0.37kW)
- it is equipped with local lighting of the working chamber
- a spray gun
The machine is in very good technical condition
Perforator, hydraulic press, extruder, cutter, BANF (Italian production)
Press force: 100T
Working area: 500mm x 400mm
Top heating plate
The machine is equipped with two work functions: extruding / cutting
The machine is equipped with safety barriers
The machine is in perfect technical condition after general renovation (bearings, sealants, grinding plates, painting, maintenance)
MINI ATOM SE 8 hydraulic cutting machine
Pressing force 8Ton
Table dimensions: 600mm x 300mm
Hammer dimensions: 300mm
Max stroke 90mm
Engine power 0.9kW
Weight 430 kg
Overall dimensions of the machine: 600mm x 690mm x 1330mm
Two-handed control for safe work
Simple intuitive operation
The machine is in perfect condition after the service
Iron Fox CD 3000N
Shoe sole milling machine
Machine equipped with its own waste extractor
Schon 8 LMES hydraulic cutting machine
Electronic control (reading the 0 point of the knife, adding / subtracting force, the height of the punch return after cutting, counter of the cuts made)
Press force: 22T
Table dimensions: 900mm x 450mm
Hammer dimensions: 450mm (installed plate is 500mm wide)
Max stroke: 150mm
Two-handed control for safe work
Simple intuitive operation
The machine is in perfect technical condition after general renovation (bearings, sealants, painting, maintenance)
Machine operation video: https://www.youtube.com/watch?v=b2BAHRRCHJE
Iron Fox AS 1500L
Shoe sole gluing press
A two-station universal sole assembly machine.
This system is particularly useful for assembling soles with very high edges, such as Opanka soles, which would be very difficult or even impossible to iron using any traditional machine.
The machine is in very good technical condition
Video of the machine in operation: https://www.youtube.com/watch?v=7uM5II3LB48
