Maier 68/1 - grinder and knife sharpener for sewing machines

A grinder that meets the highest requirements regarding the sharpening effect achieved.

Station version for table mounting, with two workstations, forward/reverse rotation switch, left tilting arm with a precise adjustment screw enabling minimum feed with an accuracy of 0.02 mm.

The shaft is driven by a V-belt.

The left side is standardly equipped with a 51/1 pot grinding wheel intended for precise sharpening. The use of appropriate optionally available equipment allows you to sharpen a very wide range of knives for machines and devices. The right side is standardly equipped with a 52/1 flat grinding wheel and is intended for sharpening, grinding and smoothing.

The machine is in very good technical condition

Kyotex is an innovative and ecological adhesive system used by major Italian and European shoe manufacturers and leather workers for many applications, in particular for attaching shoe insoles.

It is based on the combination of an innovative, high-performance self-adhesive foil.

Full manufacturer's documentation for the machine

Video of the machine working: https://www.youtube.com/watch?v=A1Sx2LZ_3ik

The machine is in perfect technical condition

Colli GP 7 trimming machine

The machine is equipped with an appropriate knife sharpening device.

Video of this model in operation: https://www.youtube.com/shorts/ZjGVXzNbpBU

The machine is in very good technical condition

Press for gluing USM shoe soles

Single-station press

- shoe load sensor

- double air blowing

- time and shoe height adjustment

The machine is in very good technical condition

Video of a similar machine working: https://www.youtube.com/watch?v=YLUuoqIi2vE

CMCI MB50 Falan FT70

Original Italian product

A sewing machine for moccasin-type shoes, significantly speeds up production compared to traditional hand sewing

Technical characteristics

Speed: 400 stitches/min

Stitch length: max. 8 mm

Threads: from 0.4 mm to max. 1.0 mm waxed

Needle system: 794

Motor: EFKA DC 1550 control - 220V 50/60 Hz

Motor power: 750 kW

Full manufacturer's documentation and CE declaration included

New machine! - only start-up tests performed on the machine

Durkopp Adler 069

1-needle arm machine

- triple foot feed

- manual reverse

- 380V power supply (possibility of replacing the engine for an additional fee)

Machine in very good technical condition

Durkopp Adler 069

1-needle arm machine

- triple foot feed

- manual reverse

- 380V power supply (possibility of replacing the engine for an additional fee)

Machine in very good technical condition

The painting booth allows for the application of water-based paints with a hand-held spray gun.

The booth has:

- a water curtain

- its own dust extraction (0.37kW)

- it is equipped with local lighting of the working chamber

- a spray gun

The machine is in very good technical condition

Adler 204 - 102

Flatbed 2-needle machine (needle spacing 8mm) for heavy sewing

- large "duck" looper

- needle-tooth feed + presser foot

- manual reverse

- 380V power supply

Video of the machine working: https://www.youtube.com/shorts/KLkK4K-rDpQ

Machine in very good technical condition