Maier 68/1 - grinder and knife sharpener for sewing machines

A grinder that meets the highest requirements regarding the sharpening effect achieved.

Station version for table mounting, with two workstations, forward/reverse rotation switch, left tilting arm with a precise adjustment screw enabling minimum feed with an accuracy of 0.02 mm.

The shaft is driven by a V-belt.

The left side is standardly equipped with a 51/1 pot grinding wheel intended for precise sharpening. The use of appropriate optionally available equipment allows you to sharpen a very wide range of knives for machines and devices. The right side is standardly equipped with a 52/1 flat grinding wheel and is intended for sharpening, grinding and smoothing.

The machine is in very good technical condition

Moccasin sewing machine with the possibility of sewing 4 types of patterns.

Provides a link to the sewing possibilities of the machine: https://www.ciucani.it/wp-content/uploads/2012/09/XM-9491.pdf

The machine is in perfect condition

Colli GP 7 trimming machine

The machine is equipped with an appropriate knife sharpening device.

Video of this model in operation: https://www.youtube.com/shorts/ZjGVXzNbpBU

The machine is in very good technical condition

Press force: 20T

Table dimensions: 940mm x 480mm

Hammer dimensions: 360mm

Max stroke: 60mm

The hammer rides the die with the joystick

Two-handed operation guaranteeing work safety

Machine dimensions:

-width 940mm

-depth 1040mm

- height 1428mm

Full manufacturer's documentation for the machine

The machine is in very good technical condition after full service (new bearings, replacement of seals, maintenance)

Video from the work of this model:

https://www.youtube.com/watch?v=vxVvR7A2ZEo

CMCI MB50 Falan FT70

Original Italian product

A sewing machine for moccasin-type shoes, significantly speeds up production compared to traditional hand sewing

Technical characteristics

Speed: 400 stitches/min

Stitch length: max. 8 mm

Threads: from 0.4 mm to max. 1.0 mm waxed

Needle system: 794

Motor: EFKA DC 1550 control - 220V 50/60 Hz

Motor power: 750 kW

Full manufacturer's documentation and CE declaration included

New machine! - only start-up tests performed on the machine

GALLI TCE3000 / 2T

Machine for the production of a leather belt

It has functions:

- cutting the beginning and end of the strip

- punching

- marking with coloring foil

Regulation of the impact force, stamping time and temperature as well as the spacing (length of the strip)

The painting booth allows for the application of water-based paints with a hand-held spray gun.

The booth has:

- a water curtain

- its own dust extraction (0.37kW)

- it is equipped with local lighting of the working chamber

- a spray gun

The machine is in very good technical condition

Hydraulic cutting machine with returning hammer Kaev Schon 6005/40

Press force: 40T

Working area: 1600mm x 650mm

Weight: 3300 kg

The machine is in very good condition

Adler 204 - 102

Flatbed 2-needle machine (needle spacing 8mm) for heavy sewing

- large "duck" looper

- needle-tooth feed + presser foot

- manual reverse

- 380V power supply

Video of the machine working: https://www.youtube.com/shorts/KLkK4K-rDpQ

Machine in very good technical condition

Minerva 335 Zigzag

1 - needle machine

Max spacing 10 mm

380V clutch motor

The machine is in very good condition

Cieplo - zimno