Electronic cutter USM SB - 25
Pressure of 25 tons
Hammer width: 380mm
Table dimensions: 900mm x 450mm
Hammer travel: 7mm - 150mm
Maximum clearance between the hammer and the table: 180mm
Power: 2.4kW
The machine has a cycle counter
Very precise electronic adjustment of the cutting force and the hammer return
The machine was completely renovated
Machine operation video: https://www.youtube.com/watch?v=mA2eM26aQyA&t=2s
Stitching machine for sewing Ciucani CMCI FC99 bottoms
foot transport
Small head - ideal for sewing all types of shoes, even children's shoes from size 18"
Pneumatic presser foot lift
Needle positioning
The machine is in perfect technical condition, like new
Screw compressor Wan NK - 60
Technical data:
Power: 15kW
Capacity: 90 m3/h
Pressure: 10 bar
Supply voltage: 400V / 50Hz
Free standing compressor
Compressor in very good condition
CIUCANI MC11 UMB 01
Original Italian product
This is a convertible "BLAKE" needle machine for sewing shoe soles.
Equipped with a 360-degree electric rotating arm that allows you to sew in the most inaccessible places.
The ability to install needles with a thickness of 120 to 200 allows you to sew with both thick and thin threads.
- stitch length up to 8mm
- needle positioning
- 230V power supply + compressed air
The machine is in very good technical condition after inspection
Hydraulic cutter with returning hammer Chiesa TTM OPEN CE
Press force: 80T
Working area: 1600mm x 600mm
Weight: about 4300 kg
Equipped with material feeders
Full manufacturer's documentation for the machine
It has a CE certificate
The machine is in perfect condition
Video of the machine's operation: https://www.youtube.com/watch?v=rtlA9olMDPk
Screw compressor Wan NK - 60
Technical data:
Power: 15kW
Capacity: 90 m3/h
Pressure: 10 bars
Supply voltage: 400V / 50Hz
Free standing compressor
Compressor in very good condition after full service ready to work
Durkopp Adler 069
Machine with a special high post
- triple foot transport
- manual reverse
- needle positioning
The machine is in very good condition
Strobel 141 - 23EV
This machine sews the insoles to the upper with a strong overcasting stitch. Unlike the traditional method, the Strobel method saves a lot of material. This machine can be used to sew insoles in leather and textile footwear with a total thickness of the sewn layer up to 7 mm. The gathering device facilitates the insertion operation.
Stitch type: single-thread, overcast
Stitch length: 3 - 8 mm adjustable
Needle system: 134
Energy-saving 230V motor
The machine is in very good technical condition
The machine is flat in full automation
- triple roller-needle-tooth transport
- locking
- thread cutting
- large looper
- equipped with an edge ruler
Leibrock VBF
The machine is used to form the tip of the upper, used in the "Strobel" assembly process or facilitates subsequent studing.
The machine is equipped with two activation stations (warm + steam) and two cold stations performing proper forming
The machine is in very good technical condition
Video of the machine in operation: https://www.youtube.com/watch?v=rnU5GP3KcTA
Durkopp Adler 205 - 370 (heaviest in its class)
Arm machine
1 - needle
- triple foot transport
- large catcher (duck)
- pneumatic reverser
- pneumatic presser foot lifting
- needle positioning
- 230V power supply + compressed air
We have several pieces of this model
The machine is in very good technical condition
Video of this model in operation: https://www.youtube.com/watch?v=hTfnW9yIlYU
Fully automatic bollard machine
- triple roller transport
- automatic and manual locking
- thread cutting
- upper lining cutter
The machine is in very good condition
