Description
The sticking act of this machine is made by putting the shoe with the toe-cap faced down into the pneumatic bags. After closing the chamber with the lid, the shoe is subjected during a preestablished time to the necessary pressure to get a good sticking according to the needs of the applied sole.
his machine is pneumatic and is controlled electronically and it has the chance of choosing the work only in the left bag, only in the right bag or in both alternately. Likewise, the time and the pressure can be regulated confortably and easily in any moment. These parameters are continuously visible to be controlled during the work process, and they are shared by both chambers.
Over the display control appear the press time, discharge times, way of work in one chamber, in another or in both alternately, as well as the number ofpressed shoes.
When the sticking process is finished, a quick pressure discharge is inmediately applied by a vacuum system to accelerate the sticking process in the other chamber. This vacuum process is easily regulated as you want.
All materials used in its construction comply with ECC regulations and have been awarded the corresponding certificates of guarantee.
TECHNICAL INFORMATION
Voltage V. 220
Maximum power absorved Kw. 0,1
Air consumption 100 lit/cic
Dimensions mm. 475x836x1170
Net weight Kg. 185
Weight with packaging Kg. 210
S-501-MA
Diameter entrance hole mm. 250
S-501-ME
Diameter entrance hole mm. 190