The sturdiness and simplicity of the machine guarantees trouble free operation in mass production.
MB10 driven by electronic motor, which allows to vary speed. It is therefore suitable for the most part of perforating works.
MB S driven by normal motor, with fixed speed and perforating rod automatic stop.
Video: https://www.youtube.com/watch?v=xfjGtLKd_mQ
Machine to make holes for shoe laces. It is possible to make the holes on both sides of uppers simultaneously and to select, by moving the pressing truck, the quantity of the holes to be made up to a maximum of 7 holes each side. It is possible to adjust the alignment of the holes by means of 2 levers on both sides of the machine head and by means of a knob placed on the right side of the machine. It is possible to adjust the distance between the holes from a minimum of abt 10 mm and a maximum of abt 19 mm. from a centre to another. The set of 7 perforators composed by punches and dies, can be selected among 10 different sizes from 1.8 mm and 4.8 mm.
Video: https://www.youtube.com/watch?v=VFfGYrYIWHg
Eyeletting Machine
Double Feeding Self Piercing Eyeleting Machine to apply eyelets with washer (Max shank diameter 8 mm.). The machine is provided with a piercing device by cam with a precise and easy adjusting to assure good cutting for each material. All the functions are under the conrol of a microprocessor, a partial counter with reset and a total counter are available. Among the optoins a slow motion for TEST and a MULTIPLE SETTING to repeat a programmable sequence of a certain number of eyelets and the time between the setting.
Video: https://www.youtube.com/watch?v=E7J_W5P6UB0
Double Feedng Attaching Machine for jeans rivets & buttons.
The lower feeder is suitable for several types of nail and this exalts the very advance flexibility of the machine. Thanks ti this possible , by replacing the upper feeder, to set both jeans buttons and jeans rivets of different type. All the functions are under the control of a microprocessor, a partial counter with reset and total counter are available. Among the options a slow motion for TEST and a MULTIPLE SETTING to repeat a programmable sequence of a certain number of eyelets and the time between the setting.
Video: https://www.youtube.com/watch?v=P9WRLvWfczE
Small press for manual processing, versatile and easy to use.
Technical Data
Throat depth 125mm
Setting force 400 DN (kg)
Stroke 35 mm
Air consumption 2 Nl/cycle/6 bar
Weight 45 kg/Kilos
Video: https://www.youtube.com/watch?v=g_XmwDQKpKc
Automatic attaching machine with electric motor (available also as pneumatic version Mod. MG1-P) for the setting of hooks. A very versatile feeder for various type of hooks. All the functions are under the control of a microprocessor, a partial counter with reset and a total counter are available. Among the options a slow motion for TEST and a MULTIPLE SETTING to repeat a programmable sequence of a certain number of eyelets and the time between the setting. This machine can be transformed as rivetting or eyeletting machine or equipped with a lower feeder for washer.
Technical Data
Absorbed power max 0,4 KWe
Power supply single-phase 230 V 50 / 60 Hz
Machine dimensions cm. 45 x 50 x 140 h.
Machine weight Kg. 75
The pleating machine SAGITTA PT 84 is a machine making straight or curved pleats to decorate shoe uppers, parts of bags and leather goods. It can pleat different materials: leather, synthetic materials and suitable fabrics. The PT 84 is a very simple and handy machine which can be easily used by unskilled staff. It can be adjusted in order to get excellent work results. Feeding speed of material variable from 0 to 6 mt./min. Adjustable pleating depth mm. 1-2-3.
Video: https://www.youtube.com/watch?v=9V0yYZJ6vJA
Technical data
Electronic motor with variable speed from 0 to 6 mt./min.
Adjustable pleating depth.
Absorbed power max. 0,3 kW
Power supply single-phase 230 Volt 50/60 Hz
Machine dimensions cm. 110 x 55 x 115 h.
Machine weight Kg 70
Hot and cold Backpart moulding machine.
Nr.2 central cold stations + Nr.2 lateral hot stations with moulding airbag system with vacuum device, pulling pincers and mould support with leaning movement.
Main features:
– Small dimensions (only 130 cm.) with 4 stations all with leaning mould.
– Possibility to work with standard position or back-to-front for moccasin-tubolar.
– Sliding mould support and pulling pincer for an easier upper positioning.
– Adjustable moulding pressure.
– Moulding airbag system with adjustable inclination.
– Inclined pincers with vertical+horizontal indipendent pulling.
– Possibility to release the polling pincers during the moulding.
– LCD display for temperatures and working parameters setting.
– Cooling system by liquid.
